125x300mm Woody Standard Joist Hanger
125x300mm Woody Standard Joist Hanger
Price: £1.74 (£2.09 inc VAT)
- Product Code: A1-5169
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: STD - 125x300
- Weight: 239.00g
125x300mm Woody Standard Joist Hanger
Width: 125mm
Height: 300mm
Thickness: 0.8mm
Weight: 239g
125x300mm Woody Standard Joist Hanger is a timber to timber joist hanger produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is also available in stainless steel. The hanger includes a base tag, which can significantly contribute to faster and more accurate installation and to avoid unnecessary rotation. This tag can easily be bent if it is not necessary.
Long term safe working load = 6 kN. The hangers have been accordingly tested by Ceram Research. The test results are available upon request.
.png)
FIXING INSTRUCTIONS for 125x300mm Woody Standard Joist Hanger
- 30mm x 3.75mm Square Twisted nails should be used for nailing the holes during installation.
- For stainless steel products use 30mm x 3.75mm stainless steel annular ring shank nails.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- The tag can be bent if not required.
SPECIFICATION
- Joist bearing 50mm.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Timber-to-Timber-Joist-Hangers_data_sheet.pdf
Brand: TECO
Model: WR63X200R100
Delivery Time: 2 - 4 days
63mm x 200mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£5.41
£6.49 inc VAT
Brand: TECO
Model: MMINI - 44x68
Delivery Time: In stock, 1-2 days
44x68mm Mini Mini Joist Hanger is a timber to timber joist hanger suitable for light duty applications such as trimmers, ceiling joists and decking. The hanger is produced from 1mm thick pre-galvanised mild steel. The tag on the base of the hanger helps avoid rotation and aids fast, accurate lo..
£0.53
£0.64 inc VAT
Brand: TECO
Model: FHM47/225
Delivery Time: In stock, 1-2 days
47mm x 225mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£2.82
£3.38 inc VAT
Brand: TECO
Model: HI240/3
Delivery Time: In stock, 1-2 days
Scrolled Hot Dipped Galvanised Hip Irons provide a decorative restraint when bedding hip tiles. Available in a range of sizes and finishes. InstallationDue to the angle of the roof along the hip, a Hip Iron is fixed at the bottom of the hip first to support the weight of the hip tile..
£1.79
£2.15 inc VAT
Brand: TECO
Model: STUDBZPM6
Delivery Time: In stock, 1-2 days
M6 Bright Zinc Plated Studding ( threaded bar), suitable for many applications. Supplied as standard in mild steel, high tensile available to order. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stai..
£1.66
£1.99 inc VAT
Brand: TECO
Model: PB8/12
Delivery Time: In stock, 1-2 days
Plaster depth 8-12mm uPVC Plaster Angle Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact..
£3.94
£4.73 inc VAT