150x150mm Welded Masonry Joist Hanger
150x150mm Welded Masonry Joist Hanger
Price: £8.46 (£10.15 inc VAT)
- Product Code: A1-5065
- Delivery Time: 2 - 4 days
- Brand: TECO
- Model: WM150x150
- Weight: 1,092.00g
150x150mm Welded Masonry Joist Hanger
150mm x 150mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to timber and timber to steel applications, where masonry flange should be securely fixed to the timber or to steel beams using appropriate fixings.
Installation of 150x150mm Welded Masonry Joist Hanger
- The back plate of the hanger should lie flat against the vertical masonry support,
- The masonry flange should never be placed in dry slots,
- Masonry flange should have a minimum of 3 courses (675mm masonry) above,
- Use correct strength mortar as per British Standard,
- Both supporting and above masonry should be allowed to mature before any load is applied,
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm,
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent,
- To provide lateral restraint HD Straps should be used,
- Use appropriate corrosion resistant fixings. Do not use galvanised fixings with stainless steel products or vice versa.
Specification
- Pre Galvanised Steel S280GD+Z275
- Also available in Stainless Steel
Certification
- Manufactured to EN 845 - 1:2013.
- Galvanised steel to EN10346 DX51D Z275 or grade 1.4301 austenitic stainless steel to EN 10088 - 2.
- Tested by CERAM Research Ltd Notification Body No.1289.
Masonry-Hangers_data_sheet.pdf
Brand: TECO
Model: WS63x225S100
Delivery Time: 2 - 4 days
Straddle: 100mm63mm x 225mm Masonry Straddle Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The Masonry Straddle hanger is two hangers joined together by a plate on the masonry flange to enable exact alignment of two joists positioned dire..
£12.17
£14.60 inc VAT
Brand: TECO
Model: WB30x2.5
Delivery Time: In stock, 1-2 days
30x2.5 galvanised steel water bar for fitting into door sills for weather protection. Galvanised steel EN 10346 DX51D Z275. Traditionally used with wooden doors, the water bar is fitted into the threshold so that the front door closes against it, sealing any gaps and preventing wind and rain from en..
£3.61
£4.33 inc VAT
Brand: TECO
Model: TCSS 63mm M10
Delivery Time: In stock, 1-2 days
Diameter: 63mmTeeth Size: 1.2mm63mm M10 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are produced from pre-gal..
£0.76
£0.91 inc VAT
Brand: TECO
Model: AR9
Delivery Time: In stock, 1-2 days
230mm Arris Rail Bracket is suitable for securing arris rails to a square fence post when building a feather edge fence or to repair a broken wooden arris rail to an existing post. Made from galvanised steel EN 10346 DX51D Z275.Installation ..
£1.02
£1.22 inc VAT
Brand: TECO
Model: TCDS 38mm M12
Delivery Time: In stock, 1-2 days
Diameter: 38mmTeeth Size: 0.9mm38mm M12 Double Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are produced from pre-gal..
£0.29
£0.35 inc VAT
Brand: TECO
Model: GBCLIP150/25
Delivery Time: In stock, 1-2 days
150mm Galvanised Gravel Board Clips for fitting gravel boards securely to timber fence posts. Width 25mm. Made from Galvanised Steel EN 10346 DX51D Z275. ..
£1.16
£1.39 inc VAT