63mm M10mm Galvanised Steel Single Sided Tooth Plate Timber Connector
63mm M10mm Galvanised Steel Single Sided Tooth Plate Timber Connector
Price: £0.73 (£0.88 inc VAT)
- Product Code: A1-5312
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: TCSS 63mm M10
- Weight: 27.00g
63mm M10mm Galvanised Steel Single Sided Tooth Plate Timber Connector
Weight: 27g
Diameter: 63mm
Teeth Size: 1.2mm
63mm M10 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are produced from pre-galvanised steel, in accordance to the BS EN 10346:2004 DX51D+Z275. Also available in stainless steel option.
SPECIFICATION
All the products are manufactured in accordance with the BS EN 14545:2008.
INSTALLATION
Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
Brand: TECO
Model: WM44x200
Delivery Time: 2 - 4 days
44mm x 200mm Welded Masonry Joist Hanger is designed to support 200mm high timber joist. The joist hanger's actual height is 190mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£2.41
£2.89 inc VAT
Brand: TECO
Model: TCDS 50mm M12
Delivery Time: In stock, 1-2 days
Diameter: 50mmTeeth Size: 0.9mm 50mm M12 Double Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are ..
£0.34
£0.41 inc VAT
Brand: TECO
Model: LD200F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 200mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres hol..
£0.53
£0.64 inc VAT
Brand: TECO
Model: WSTV
Delivery Time: In stock, 1-2 days
1200mm Ferritic Stainless Steel Wall Starter Kit joins new walls to existing masonry, suitable for both internal and external brick or block walls. The connectors can be slotted together up to a maximum of 8 metres or 3 storeys high, from 60 to 250mm thick. Made from Ferritic Stainless Steel (G..
£9.19
£11.03 inc VAT
Brand: TECO
Model: EMLS8x2
Delivery Time: In stock, 1-2 days
Gauge: 0.4mmHole length: 20mmHole width: 10mm 8x2 Stainless Steel Expanded Metal Lath Sheet is mainly used for internal and external plaster when applied on suspended ceilings and walls. It is also suitable for encasing steel columns and beams, assisting in the protection from fire. Made o..
£27.80
£33.36 inc VAT
Brand: TECO
Model: FB75
Delivery Time: In stock, 1-2 days
75x75mm Galvanised steel, powder coated Bolt Down Shoe. A fence post supports in both standard and heavy duty. Hole size M10. InstallationTo bolt down onto existing concrete.Suggested fixing 10 x 80mm sleeve anchor...
£11.11
£13.33 inc VAT