50x200mm Welded Masonry Joist Hanger
50x200mm Welded Masonry Joist Hanger
Price: £2.41 (£2.89 inc VAT)
- Product Code: A1-5100
- Delivery Time: 2 - 4 days
- Brand: TECO
- Model: WM50x200
- Weight: 640.00g
50x200mm Welded Masonry Joist Hanger
Width: 50mm
Height: 190mm
Weight: 640g
50mm x 200mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timber or to steel beams using appropriate fixings. Long term safe working load = 3.5 kN.
Installation of 50x200mm Welded Masonry Joist Hanger
- The back plate of the hanger should lie flat against the vertical masonry support,
- The masonry flange should never be placed in dry slots,
- Masonry flange should have a minimum of 3 courses (675mm masonry) above,
- Use correct strength mortar as per British Standard,
- Both supporting and above masonry should be allowed to mature before any load is applied,
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm,
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent,
- To provide lateral restraint HD Straps should be used,
- Use appropriate corrosion resistant fixings. Do not use galvanised fixings with stainless steel products or vice versa.
Specification
- Pre Galvanised Steel S280GD+Z275
- Also available in Stainless Steel
Certification
- Manufactured to EN 845 - 1:2013.
- Galvanised steel to EN10346 DX51D Z275 or grade 1.4301 austenitic stainless steel to EN 10088 - 2.
- Tested by CERAM Research Ltd Notification Body No.1289.
Masonry-Hangers_data_sheet.pdf
Brand: TECO
Model: LL - 76x600
Delivery Time: In stock, 1-2 days
76mm x 600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. It is especially designed for loft conversion projects. This joist hanger ls also available in stainless steel. The produc..
£4.69
£5.63 inc VAT
Brand: TECO
Model: FHMR47X225R140
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£4.45
£5.34 inc VAT
Brand: TECO
Model: HBH6/1000
Delivery Time: In stock, 1-2 days
6mm Helical Bar is used in a variety of applications; in general the metre lengths are used for crack stitching and reinforcing masonry in both new and existing masonry structures. The deformation of the fins makes the bonding characteristics of the Helical Bar far superior to alternative standard r..
£4.60
£5.52 inc VAT
Brand: TECO
Model: FHMR47X100R100
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.06
£3.67 inc VAT
Brand: TECO
Model: FEX100
Delivery Time: In stock, 1-2 days
100x100mm Galvanised powder coated Fence Post Extender. Ideal for joining two fence posts together. Hole size M10. Please note: The design changes from time to time without notice. Sometimes we get the extenders with the holes, sometimes with the slats. At the moment ..
£13.64
£16.37 inc VAT
Brand: TECO
Model: WM50x100
Delivery Time: 2 - 4 days
50mm x 100mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£1.90
£2.28 inc VAT