63x200mm Welded Masonry Joist Hanger
63x200mm Welded Masonry Joist Hanger
Price: £4.73 (£5.68 inc VAT)
- Product Code: A1-5108
- Delivery Time: 2 - 4 days
- Brand: TECO
- Model: WM63x200
- Weight: 748.00g
63x200mm Welded Masonry Joist Hanger
Width: 63mm
Height: 200mm
Weight: 748g
63mm x 200mm Welded Masonry Joist Hanger is designed to support 200mm high timber joist. The joist hanger's actual height is 190mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to timber and timber to steel applications, where masonry flange should be securely fixed to the timber or to steel beams using appropriate fixings.
Installation of 63x200mm Welded Masonry Joist Hanger
- The back plate of the hanger should lie flat against the vertical masonry support,
- The masonry flange should never be placed in dry slots,
- Masonry flange should have a minimum of 3 courses (675mm masonry) above,
- Use correct strength mortar as per British Standard,
- Both supporting and above masonry should be allowed to mature before any load is applied,
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm,
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent,
- To provide lateral restraint HD Straps should be used,
- Use appropriate corrosion resistant fixings. Do not use galvanised fixings with stainless steel products or vice versa.
Specification
- Pre Galvanised Steel S280GD+Z275
- Also available in Stainless Steel
Certification
- Manufactured to EN 845 - 1:2013.
- Galvanised steel to EN10346 DX51D Z275 or grade 1.4301 austenitic stainless steel to EN 10088 - 2.
- Tested by CERAM Research Ltd Notification Body No.1289.
Masonry-Hangers_data_sheet.pdf
Brand: TECO
Model: HD1500F
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1500mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.INSTALLAT..
£4.24
£5.09 inc VAT
Brand: TECO
Model: TFT100
Delivery Time: In stock, 1-2 days
100mm Timber Frame Ties are suitable for tying masonry outer cladding to softwood structural framework of domestic dwellings and industrial/commercial buildings up to 4 storeys and not greater than 15m in height. Suitable at a density of 4.4 ties per square meter for buildings anywhere in the South ..
£0.43
£0.52 inc VAT
Brand: TECO
Model: EB3x10
Delivery Time: In stock, 1-2 days
10mm Galvanised Steel Plasterboard Edge Bead that is used to reinforce plasterboard edges by enclosing them in a rotective steel enclosure. It can be used with thin coat plaster or drylining paper tape.Specification Galvanised steel EN 10346 DX51D Z275..Installation Use appropriate fixings..
£2.93
£3.52 inc VAT
Brand: TECO
Model: WM100x125
Delivery Time: 2 - 4 days
100mm x 125mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the tim..
£4.38
£5.26 inc VAT
Brand: TECO
Model: TCDS 50mm M12
Delivery Time: In stock, 1-2 days
Diameter: 50mmTeeth Size: 0.9mm 50mm M12 Double Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are ..
£0.34
£0.41 inc VAT
Brand: TECO
Model: LL - 44x600
Delivery Time: In stock, 1-2 days
44mm x 600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. It is especially designed for loft conversion projects. This joist hanger ls also available in stainless steel. The produc..
£4.03
£4.84 inc VAT