100x200mm R100mm Welded Return Hanger

100x200mm R100mm Welded Return Hanger
Rate this product
100x200mm R100mm Welded Return Hanger
Price: £5.70 (£6.84 inc VAT)
  • Product Code: A1-5289
  • Delivery Time: 2 - 4 days
  • Brand: TECO
  • Model: WR100X200R100
  • Weight: 1,091.00g

100x200mm R100mm Welded Return Hanger

Width: 100mm
Height: 200mm
Thickness: 2.4mm
Weight: 1091g

100mm x 200mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but any variations can be made to order. Made from 2.4mm thick pre-Galvanised steel EN 10346 DX51D Z275. Also available in stainless steel.

Installation of 100x200mm R100mm Welded Return Hanger

  • The back plate of the hanger should lie flat against the vertical masonry support.
  • Masonry flange should have a minimum of 3 courses (675mm masonry) above.
  • Both supporting and above masonry should be allowed to mature before any load is applied.
  • Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
  • Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
  • To provide lateral restraint heavy duty straps should be used.
  • The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
  • Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
  • Use correct strength mortar as per British Standard.

Specification

  • Galvanised steel EN 10346 DX51D Z275 or grade 1.4301 austenitic stainless steel to EN 10088-2.
  • Manufactured to EN 845-1:2013.
  • Tested by CERAM Research Ltd Notification Body No.1289.
44x230mm Multifunctional Joist Hanger
Brand: TECO Model: MFT44/504BA - 44x230
Delivery Time: In stock, 1-2 days
44x230mm Multifunctional Joist Hanger
44mm x 230mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base locati..
£3.09
£3.71 inc VAT
Bright Zinc plated Square Plate Washers M12 - box of 100
Brand: TECO Model: WSQPBZPM12
Delivery Time: In stock, 1-2 days
Bright Zinc plated Square Plate Washers M12 - box of 100
M12 Bright Zinc plated Square Plate Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. Thickness 3mm. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not u..
£18.00
£21.60 inc VAT
44x225mm Welded Masonry Joist Hanger
Brand: TECO Model: WM44x225
Delivery Time: 2 - 4 days
44x225mm Welded Masonry Joist Hanger
44mm x 225mm Welded Masonry Joist Hanger is designed to support 225mm high timber joist. The joist hanger's actual height is 215mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to timber ..
£2.61
£3.13 inc VAT
100x275mm Welded Masonry Joist Hanger
Brand: TECO Model: WM100x275
Delivery Time: 2 - 4 days
100x275mm Welded Masonry Joist Hanger
100mm x 275mm Welded Masonry Joist Hanger is designed to support 275mm high timber joist. The joist hanger's actual height is 265mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to timber..
£9.90
£11.88 inc VAT
200mm Stainless Steel Frame Cramp
Brand: TECO Model: FFCS250
Delivery Time: In stock, 1-2 days
200mm Stainless Steel Frame Cramp
200mm Stainless Steel Frame Cramp is traditionally used for fixing wooden door and window frames into block work. Frame Cramps can also be used for restraining masonry to new and existing structures in non-structural applications and can easily be shot fired into steel work. Available in Grade 1.430..
£1.11
£1.33 inc VAT
47x175mm - R140mm Masonry Return Hanger
Brand: TECO Model: FHMR47X175R140
Delivery Time: In stock, 1-2 days
47x175mm - R140mm Masonry Return Hanger
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be ..
£4.54
£5.45 inc VAT