44x600mm Woody Long Leg Joist Hanger
44x600mm Woody Long Leg Joist Hanger
Price: £4.03 (£4.84 inc VAT)
- Product Code: A1-5180
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: LL - 44x600
- Weight: 587.00g
44x600mm Woody Long Leg Joist Hanger
Width: 44mm
Height: 600mm
Thickness: 1.4mm
Weight: 587g
44mm x 600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. It is especially designed for loft conversion projects. This joist hanger ls also available in stainless steel. The product also offers substantial safe working load of 7,11kN at 1.5mm deflection, meaning there is no fear of the hanger breaking off, if the given load of 28,04kN are respected. The hangers have been accordingly tested by Ceram Research, whereas the test results are available upon request.
.png)
FIXING INSTRUCTIONS for 44x600mm Woody Long Leg Joist Hanger
It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
SPECIFICATION
- Joist bearing 50mm.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Long-Leg-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: NUTFBZPM16
Delivery Time: In stock, 1-2 days
M16 Zinc Plated Hex Full Nuts for use with bolts and studding. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa...
£22.08
£26.50 inc VAT
Brand: TECO
Model and Size: GTS - 76x300
Delivery Time: In stock, 1-2 days
76mm x 300mm Girder Truss Shoe is especially designed for supporting trussed rafters. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The hanger includes a base tag which can significan..
£3.33
£4.00 inc VAT
Brand: TECO
Model and Size: WSS4x20
Delivery Time: In stock, 1-2 days
4x20mm Stainless Steel Wood screws - ideal for fixing stainless steel brackets and stainless steel mesh products when used with a stainless steel 18mm diameter washer. Grade 1.4301 austenitic stainless steel to EN 10088-2. Screw directly into timber using a small pilot hole if required...
£44.38
£53.26 inc VAT
Brand: TECO
Model and Size: NPSTD85x175
Delivery Time: In stock, 1-2 days
85x175mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropria..
£33.00
£39.60 inc VAT
Brand: TECO
Model and Size: GTS - 38x300
Delivery Time: In stock, 1-2 days
38mm x 300mm Girder Truss Shoe is especially designed for supporting trussed rafters. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The hanger includes a base tag which can significan..
£2.24
£2.69 inc VAT
Brand: TECO
Model and Size: LL - 150x450
Delivery Time: In stock, 1-2 days
150x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support...
£6.36
£7.63 inc VAT