Alkaline Resistant Render Mesh 1m x 50m

Alkaline Resistant Render Mesh 1m x 50m
Price: £56.14 (£67.37 inc VAT)
- Product Code: A1-5533
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: ARRM
- Weight: 8,000.00g
Alkaline Resistant Render Mesh 1m x 50m
Length: 50000mm
Width: 1000mm
Weight: 8000g
1m x 50m Alkaline Resistant Render Mesh reinforcing mesh which is made from woven fibre-glass yarns and coated with an alkaline resistant latex. This coating prevents the alkaline present in cements from degrading the glass fibre, resulting in reduced strength. The mesh is ideal for use in construction and is mainly used to reinforce concrete, cement, screeds, renders and plasters. It is an ideal reinforcement for render, even where cracking can be seen and allows previously uneven masonry substrates to be rendered.
Specification
- Coated with alkaline resistant latex.
- Roll Size: 1m x 50m.
- Mesh Size: 4mm x 4mm.
- Weight: 160g per square metre.
- Colour: White or Pink.
Installation
- It is recommended to place the meshes to be within the first 50% of the render or plaster depth. In general, the nearer the mesh to the substrate, the better.
- Store rolls in a cool, dry location, away from direct contact with the ground or concrete, out of direct sunlight. Protect rolls from weather and other damage. Store individual rolls or roll cases on end.
Brand: TECO
Model and Size: MBS3x16
Delivery Time: In stock, 1-2 days
16mm Stainless Steel Movement Mesh Beads are used to overcome movement tolerances in plaster and render finishes minimising racking in finished coat. It can also be used to act as a stop barrier for when a change in finish is required or type of render finish. 3m length.Installation Use ap..
£22.31
£26.77 inc VAT
Brand: TECO
Model and Size: WSTDGM8
Delivery Time: In stock, 1-2 days
Diameter: 16mm M8 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galv..
£0.89
£1.07 inc VAT
Brand: TECO
Model and Size: DWS50
Delivery Time: In stock, 1-2 days
3.5x50mm Drywall Screws are high quality screws designed for fixing plasterboard. Black phosphate finish. Features - 3.5mmBugle head Sharp point.InstallationScrew directly into timber, no pre drilling required. ..
£17.23
£20.68 inc VAT
Brand: TECO
Model and Size: LD1200T100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 1200mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm off..
£2.09
£2.51 inc VAT
Brand: TECO
Model and Size: WR44X225R100
Delivery Time: 2 - 4 days
44mm x 225mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£4.70
£5.64 inc VAT
Brand: TECO
Model and Size: WS63x250S100
Delivery Time: 2 - 4 days
Straddle: 100mm63mm x 250mm Masonry Straddle Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The Masonry Straddle hanger is two hangers joined together by a plate on the masonry flange to enable exact alignment of two joists positioned..
£12.74
£15.29 inc VAT