TRS Restraint Strap 1200mm Bent 100mm
TRS Restraint Strap 1200mm Bent 100mm
Price: £2.18 (£2.62 inc VAT)
- Product Code: A1-5803
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: TRS1200B100
- Weight: 444.00g
TRS Restraint Strap 1200mm Bent 100mm
Length: 1200mm
Width: 36mm
Thickness: 1.4mm
Weight: 444g
1200mm bent 100mm Ron Sammons strap is a lightweight restraint strap that can be used instead of a traditional Heavy Duty Strap to provide lateral restraint of roof trusses, rafters and joists tied to masonry and for vertical applications such as holding down the wall plate. Designed to The Building Regulations BS 5268 Part 3 and other building standards for lateral restraint.
CHARACTERISTICS
- 1.4mm thick x 36mm wide,
- Lightweight design makes it easier to handle,
- No need to notch joists making it easier and quicker to install,
- Easier to build into brickwork courses,
- More cost effective when compared to the traditional Heavy Duty Strap and Heavy Edge Rolled Strap,
- Galvanised steel EN 10346 G600,
- Manufactured to EN 845-1:2013,
- Manufactured to EN 845-1:2013.
APPLICATION
For horizontal applications, use min 6 no. 3.75 x 30mm square twist nails or equivalent fixed to timber joists/rafters.
Restraint-Straps.pdf
Brand: TECO
Model and Size: ST150
Delivery Time: In stock, 1-2 days
Mild Steel Screw Ties are used to tie timber door and window frames to adjacent brickwork. Zinc and yellow passivated mild steel. Threaded one end. Screw directly into timber using a small pilot hole if required. - 5mm..
£35.00
£42.00 inc VAT
Brand: TECO
Model and Size: WSS4x40
Delivery Time: In stock, 1-2 days
4x40mm Stainless Steel Wood screws - ideal for fixing stainless steel brackets and stainless steel mesh products when used with a stainless steel 18mm diameter washer. Grade 1.4301 austenitic stainless steel to EN 10088-2. Screw directly into timber using a small pilot hole if require..
£23.40
£28.08 inc VAT
Brand: TECO
Model and Size: SST200
Delivery Time: In stock, 1-2 days
200mm Starter Ties are used where new walls are being built directly from existing brickwork. There is a drip feature for use where there is a cavity and a new wall needs to be built. Grade 1.4301 austenitic stainless steel to EN 10088-2. Features Stainless steel, Diameter 4mm,Su..
£20.25
£24.30 inc VAT
Brand: TECO
Model and Size: PB13/19
Delivery Time: In stock, 1-2 days
Plaster depth 13-19mm uPVC Plaster Angle Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impac..
£4.18
£5.02 inc VAT
Brand: TECO
Model and Size: FFCS200
Delivery Time: In stock, 1-2 days
150mm Stainless Steel Frame Cramp is traditionally used for fixing wooden door and window frames into block work. Frame Cramps can also be used for restraining masonry to new and existing structures in non-structural applications and can easily be shot fired into steel work. Available in G..
£0.98
£1.18 inc VAT
Brand: TECO
Model and Size: SVM
Delivery Time: In stock, 1-2 days
75mm Stainless Steel Soffit Vent Mesh is for use in new build properties. It is used over vents in soffits to allow air flow to prevent condensation but prevents access to birds and insects. Made from Grade 1.4301 Austenitic Stainless Steel to EN 10088-2. Gloves should be worn as edges may be sharp...
£78.51
£94.21 inc VAT