13mm Galvanised Steel Plasterboard Edge Bead - 3m
13mm Galvanised Steel Plasterboard Edge Bead - 3m
Price: £2.93 (£3.52 inc VAT)
- Product Code: A1-5854
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: EB3x13
- Weight: 450.00g
13mm Galvanised Steel Plasterboard Edge Bead - 3m
Length: 3000mm
Width: 13mm
Weight: 450g
13mm Galvanised Steel Plasterboard Edge Bead that is used to reinforce plasterboard edges by enclosing them in a rotective steel enclosure. It can be used with thin coat plaster or drylining paper tape.
Specification
- Galvanised steel EN 10346 DX51D Z275..
Installation
- Use appropriate fixings.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
Brand: TECO
Model: PB8/12
Delivery Time: In stock, 1-2 days
Plaster depth 8-12mm uPVC Plaster Angle Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact..
£3.94
£4.73 inc VAT
Brand: TECO
Model: SRTCSS 102mm
Delivery Time: In stock, 1-2 days
Diameter: 102mm102mm Stainless Steel Split Ring Timber Connector is designed for heavy shear loads in timber to timber connections.The Split Ring with the bevelled inside and outside face makes it easier to insert in the pre-cut grooves and also gives greater load capacity.The Ring is..
£20.73
£24.88 inc VAT
Brand: TECO
Model: FHMR47X175R115
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.80
£4.56 inc VAT
Brand: TECO
Model: NP103x152
Delivery Time: In stock, 1-2 days
103x152mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropri..
£82.50
£99.00 inc VAT
Brand: TECO
Model: WM132x150
Delivery Time: 2 - 4 days
132mm x 150mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£8.01
£9.61 inc VAT
Brand: TECO
Model: LD800T100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 800mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm..
£1.39
£1.67 inc VAT