63mm x 250mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..

Galvanised Light Duty Restraint Strap 800mm Bent 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm of..

Galvanised Heavyt Duty Restraint Strap 1500mm Twisted 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset cen..

Galvanised Heavy Duty Restraint Strap 1200mm Bent 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.APP..

Diameter: 38mmTeeth Size: 0.9mm38mm M 12 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are ..

Stainless Steel Hand Rail Bracket KitKit Contains;4no. 50 x 50 x 30 wide 2.5mm Brackets, 8 no. 4 x 40 Pozi Head Wood Screws, 8no. 4 x 20 Pozi Head Wood ScrewsSpecificationAll A2 Stainless Steel. The A2 stainless steel grade bolt has a decent corrosion resistance under normal conditions such as wet s..