Light Duty Restraint Strap 200mm Flat

Light Duty Restraint Strap 200mm Flat
Rate this product
Light Duty Restraint Strap 200mm Flat
Price: £0.55 (£0.66 inc VAT)
  • Product Code: A1-5367
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model: LD200F
  • Weight: 102.00g
Need custom bends or twists?

Fill below and send for a quote.

Strap #1

/
Total length of the strap
mm
Length to
/
mm
angle
degrees
Add another bend/twist
Quantity
Add next custom strap

Galvanised Light Duty Restraint Strap 200mm Flat

Length: 200mm
Width: 28mm
Thickness: 2.4mm
Weight: 102g

Galvanised Light Duty Restraint Strap 200mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.

SPECIFICATION

The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.

Please note: 1-3 metre lengths come from a coil rather than a solid rigid bar. The physical characteristics of the metal mean that after a certain length they can bend rather than being flat rigid. It is not a question of any fault but rather the ‘nature of the beast’. The phrase: “straps are flat” is not misleading! It means they are not bent or twisted; at no point is there any claim that they are straight and true. Strap material is edge-coat galvanised which is required by the standard. This process, and the fact that the material is a coil does cause deflection, and the longer the length the more it is apparent.

200mm Galvanised Fishtailed Frame Cramp
Brand: TECO Model: FFCPG250
Delivery Time: In stock, 1-2 days
200mm Galvanised Fishtailed Frame Cramp
200mm Galvanised Fishtailed Frame Cramp is traditionally used for fixing wooden door and window frames into block work. Frame Cramps can also be used for restraining masonry to new and existing structures in non-structural applications and can easily be shot fired into steel work. Available in galva..
£0.48
£0.58 inc VAT
uPVC Angle Bead - Plaster Depth 6-10mm
Brand: TECO Model: PB6/10
Delivery Time: In stock, 1-2 days
uPVC Angle Bead - Plaster Depth 6-10mm
Plaster depth 6-10mm uPVC Plaster Angle Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact resistant..
£3.43
£4.12 inc VAT
90x225mm R100mm Welded Return Hanger
Brand: TECO Model: WR90X225R100
Delivery Time: 2 - 4 days
90x225mm R100mm Welded Return Hanger
90mm x 225mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£5.84
£7.01 inc VAT
102mm Galvanised Steel Split Ring Timber Connector
Brand: TECO Model: SRTCG 102mm
Delivery Time: In stock, 1-2 days
102mm Galvanised Steel Split Ring Timber Connector
Diameter: 102mm102mm Galvanised Steel Split Ring Timber Connector is designed for heavy shear loads in timber to timber connections.The Split Ring with the bevelled inside and outside face makes it easier to insert in the pre-cut grooves and also gives greater load capacity.The Ring is split across ..
£7.53
£9.04 inc VAT
38x285mm Woody Standard Joist Hanger
Brand: TECO Model: STD - 38x285
Delivery Time: In stock, 1-2 days
38x285mm Woody Standard Joist Hanger
38x285mm Woody Standard Joist Hanger is a timber to timber joist hanger produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is also available in stainless steel. The hanger includes a base tag, which can significantly co..
£1.00
£1.20 inc VAT
50mm M16mm Galvanised Steel Single Sided Tooth Plate Timber Connector
Brand: TECO Model: TCSS 50mm M16
Delivery Time: In stock, 1-2 days
50mm M16mm Galvanised Steel Single Sided Tooth Plate Timber Connector
Diameter: 50mmTeeth Size: 0.9mm50mm M16 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are produced from pre-gal..
£0.50
£0.60 inc VAT