47x150mm - R115mm Masonry Return Hanger
47x150mm - R115mm Masonry Return Hanger
Price: £3.60 (£4.32 inc VAT)
- Product Code: A1-5727
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: FHMR47X150R115
- Weight: 478.00g
47x150mm - R115mm Masonry Return Hanger
Width: 47mm
Height: 150mm
Weight: 478g
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be made to order. Long term safe working load = 5.4 kN.
Features
- Pre-galvanized steel, 2.4mm thick,
- Galvanised steel EN 10346 DX51D Z600.
- Manufactured to EN 845-1:2013.
- Tested by CERAM Research Ltd.
Installation of 47x150mm - R115mm Masonry Return Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard
Masonry-Return-Hangers_data_sheet.pdf
Brand: TECO
Model: STUDBZPM16
Delivery Time: In stock, 1-2 days
M16 Bright Zinc Plated Studding ( threaded bar), suitable for many applications. Supplied as standard in mild steel, high tensile available to order. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with sta..
£4.04
£4.85 inc VAT
Brand: TECO
Model: WT-225/250
Delivery Time: In stock, 1-2 days
225mm Stainless Steel Housing Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirement..
£36.11
£43.33 inc VAT
Brand: TECO
Model: WSTDGM20
Delivery Time: In stock, 1-2 days
Diameter: 37mm M20 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galv..
£4.64
£5.57 inc VAT
Brand: TECO
Model: MBS3x16
Delivery Time: In stock, 1-2 days
16mm Stainless Steel Movement Mesh Beads are used to overcome movement tolerances in plaster and render finishes minimising racking in finished coat. It can also be used to act as a stop barrier for when a change in finish is required or type of render finish. 3m length.Installation Use ap..
£22.31
£26.77 inc VAT
Brand: TECO
Model: HWTNT250
Delivery Time: 2 - 3 Days
250mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONA..
£14.78
£17.74 inc VAT
Brand: TECO
Model: STUDBZPM12
Delivery Time: In stock, 1-2 days
M12 Bright Zinc Plated Studding ( threaded bar), suitable for many applications. Supplied as standard in mild steel, high tensile available to order. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with sta..
£2.40
£2.88 inc VAT