47x150mm - R140mm Masonry Return Hanger
47x150mm - R140mm Masonry Return Hanger
Price: £3.85 (£4.62 inc VAT)
- Product Code: A1-5728
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: FHMR47X150R140
- Weight: 500.00g
47x150mm - R140mm Masonry Return Hanger
Width: 47mm
Height: 150mm
Weight: 500g
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be made to order. Long term safe working load = 5.4 kN.
Features
- Pre-galvanized steel, 2.4mm thick,
- Galvanised steel EN 10346 DX51D Z600.
- Manufactured to EN 845-1:2013.
- Tested by CERAM Research Ltd.
Installation of 47x150mm - R140mm Masonry Return Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard
Masonry-Return-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: FFCS250
Delivery Time: In stock, 1-2 days
200mm Stainless Steel Frame Cramp is traditionally used for fixing wooden door and window frames into block work. Frame Cramps can also be used for restraining masonry to new and existing structures in non-structural applications and can easily be shot fired into steel work. Available in G..
£1.11
£1.33 inc VAT
Brand: TECO
Model and Size: ERSG3
Delivery Time: In stock, 1-2 days
Galvanised External Render Stop Bead is predominantly used to form a neat bell shaped edge at the bottom of an external render finish, thus protecting the edge and acting as a runoff for when rainfall occurs. Use on traditional wet 2 or 3 coat plaster application. Galvanised product to be used ..
£2.53
£3.04 inc VAT
Brand: TECO
Model and Size: HD1000B150
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1000mm Bent 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.APP..
£2.83
£3.40 inc VAT
Brand: TECO
Model and Size: PB2/3
Delivery Time: In stock, 1-2 days
Plaster depth 2-3mm uPVC Plaster Angle Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact resis..
£2.09
£2.51 inc VAT
Brand: TECO
Model and Size: PB
Delivery Time: In stock, 1-2 days
7mm Anker-it Yellow Plug is a standard red coloured plastic plug for 7mm hole diameter and 37mm in length. FeaturesAnchor hole size - 7mmPlug length - 37mmMin. anchor hole length - 45mmWood screw size - 5mm to 6mm ..
£1.38
£1.66 inc VAT
Brand: TECO
Model and Size: WM44x300
Delivery Time: 2 - 4 days
44mm x 300mm Welded Masonry Joist Hanger is designed to support 300mm high timber joist. The joist hanger's actual height is 290mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£4.89
£5.87 inc VAT