47x225mm - R100mm Masonry Return Hanger
47x225mm - R100mm Masonry Return Hanger
Price: £3.95 (£4.74 inc VAT)
- Product Code: A1-5742
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: FHMR47X225R100
- Weight: 638.00g
47x225mm - R100mm Masonry Return Hanger
Width: 47mm
Height: 225mm
Weight: 638g
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be made to order. Long term safe working load = 5.4 kN.
Features
- Pre-galvanized steel, 2.4mm thick,
- Galvanised steel EN 10346 DX51D Z600.
- Manufactured to EN 845-1:2013.
- Tested by CERAM Research Ltd.
Installation of 47x225mm - R100mm Masonry Return Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard
Masonry-Return-Hangers_data_sheet.pdf
Brand: TECO
Model: WR50X250R100
Delivery Time: 2 - 4 days
50mm x 250mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£4.98
£5.98 inc VAT
Brand: TECO
Model: FHMR47X200R150
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£4.19
£5.03 inc VAT
Brand: TECO
Model: WSTDGM10
Delivery Time: In stock, 1-2 days
Diameter: 20mm M10 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use gal..
£1.43
£1.72 inc VAT
Brand: TECO
Model: LD900T100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 900mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm..
£1.56
£1.87 inc VAT
Brand: TECO
Model: ARFB3X13E
Delivery Time: In stock, 1-2 days
13mm Galvanised Steel Architrave Feature Bead - Engaging is for use on traditional wet 2 or 3 coat plaster application to form a decorative shadow line at plaster edge, at door and window reveals and other joinery features. It can also be used to act as a neat divide between differing wall finishes...
£8.61
£10.33 inc VAT
Brand: TECO
Model: TCDS 38mm M12
Delivery Time: In stock, 1-2 days
Diameter: 38mmTeeth Size: 0.9mm38mm M12 Double Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.29
£0.35 inc VAT