47x225mm - R150mm Masonry Return Hanger
47x225mm - R150mm Masonry Return Hanger
Price: £4.98 (£5.98 inc VAT)
- Product Code: A1-5745
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: FHMR47X225R150
- Weight: 669.00g
47x225mm - R150mm Masonry Return Hanger
Width: 47mm
Height: 225mm
Weight: 669g
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be made to order. Long term safe working load = 5.4 kN.
Features
- Pre-galvanized steel, 2.4mm thick,
- Galvanised steel EN 10346 DX51D Z600.
- Manufactured to EN 845-1:2013.
- Tested by CERAM Research Ltd.
Installation of 47x225mm - R150mm Masonry Return Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard
Masonry-Return-Hangers_data_sheet.pdf
Brand: TECO
Model: TIJ-TI - 50x240mm
Delivery Time: In stock, 1-2 days
50x240mm Top Fix I-Joist Hanger is an innovative new backer free Joist Hanger to suit solid engineered wood products as well as I-Joists. It is engineered to combine maximum load carrying capacity with easy hands-free site installation, at minimum cost. Long term safe working load = 4.3 kN. Long te..
£1.71
£2.05 inc VAT
Brand: TECO
Model: LD200B50
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 200mm Bent 50mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.SPECIFICATIO..
£0.55
£0.66 inc VAT
Brand: TECO
Model: ERSG3
Delivery Time: In stock, 1-2 days
Galvanised External Render Stop Bead is predominantly used to form a neat bell shaped edge at the bottom of an external render finish, thus protecting the edge and acting as a runoff for when rainfall occurs. Use on traditional wet 2 or 3 coat plaster application. Galvanised product to be used in sh..
£2.78
£3.34 inc VAT
Brand: TECO
Model: TCSS 63mm M16
Delivery Time: In stock, 1-2 days
Diameter: 63mmTeeth Size: 1.2mm63mm M16 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are produced from pre-gal..
£0.76
£0.91 inc VAT
Brand: TECO
Model: WTIC50
Delivery Time: In stock, 1-2 days
The Universal Wall Tie Insulation Clip is a retaining clip used to hold insulation material against the inner wall of a cavity.Specification Universal retaining clip. Clip straight on to Wall Tie...
£4.56
£5.47 inc VAT
Brand: TECO
Model: FHMR47X200R150
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be ..
£4.69
£5.63 inc VAT