75x200mm Welded Straddle Hanger 100ST
75x200mm Welded Straddle Hanger 100ST
Price: £12.30 (£14.76 inc VAT)
- Product Code: A1-5080
- Delivery Time: 2 - 4 days
- Brand: TECO
- Model: WS75x200S100
- Weight: 2,800.00g
75x200mm Welded Straddle Hanger 100ST
Width: 75mm
Height: 200mm
Thickness: 2.4mm
Weight: 2800g
Straddle: 100mm
75mm x 200mm Masonry Straddle Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The Masonry Straddle hanger is two hangers joined together by a plate on the masonry flange to enable exact alignment of two joists positioned directly opposite each other on either side of a wall or beam. Made from 2.4mm thick Galvanised steel EN 10346 DX51D Z275. Long term safe working load = 3.5 kN.
INSTALLATION of 75x200mm Welded Straddle Hanger 100ST
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Use appropriate fixings.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard.
Masonry-Straddle-Hangers_data_sheet.pdf
Brand: TECO
Model: WSS4x20
Delivery Time: In stock, 1-2 days
4x20mm Stainless Steel Wood screws - ideal for fixing stainless steel brackets and stainless steel mesh products when used with a stainless steel 18mm diameter washer. Grade 1.4301 austenitic stainless steel to EN 10088-2. Screw directly into timber using a small pilot hole if required...
£43.20
£51.84 inc VAT
Brand: TECO
Model: WM44x250
Delivery Time: 2 - 4 days
44mm x 250mm Welded Masonry Joist Hanger is designed to support 250mm high timber joist. The joist hanger's actual height is 240mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£4.51
£5.41 inc VAT
Brand: TECO
Model: LL - 44x450
Delivery Time: In stock, 1-2 days
44x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support.&..
£3.41
£4.09 inc VAT
Brand: TECO
Model: PBPS10/12
Delivery Time: In stock, 1-2 days
Plaster depth 10-12mm uPVC Plaster Stop Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact..
£3.43
£4.12 inc VAT
Brand: TECO
Model: WR75X250R100
Delivery Time: 2 - 4 days
75mm x 250mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£6.16
£7.39 inc VAT
Brand: TECO
Model: US3.5x25
Delivery Time: In stock, 1-2 days
3.5x25mm Ultimate Wood Screws - tempered and waxed high quality zinc plated steel, self-centering, self-countersinking, stick fit wood screws with slotted shank for reduced wood splitting and a sharp point for rapid starting with minimum force.CharacteristicsTempered and waxed high quality zinc..
£4.24
£5.09 inc VAT