90x240mm Top Fix I-Joist Hanger
90x240mm Top Fix I-Joist Hanger
Price: £1.88 (£2.26 inc VAT)
- Product Code: A1-5460
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: TIJ-TI - 90x240mm
- Weight: 259.00g
90x240mm Top Fix I-Joist Hanger
Width: 90mm
Height: 240mm
Thickness: 0.7mm
Weight: 259g
90x240mm Top Fix I-Joist Hanger is an innovative new backer free Joist Hanger to suit solid engineered wood products as well as I-Joists. It is engineered to combine maximum load carrying capacity with easy hands-free site installation, at minimum cost. Long term safe working load = 4.3 kN. Long term safe working load with enhanced nailing = 8.6 kN.
CHARACTERISTICS
- Unique hands free installation,
- Qualified for use with various nail types,
- Requires less nails,
- Face fix or top fix design,
- Enhanced load carrying option,
- Can be used on solid EWP or I-Joists.
FIXING INSTRUCTIONS for 90x240mm Top Fix I-Joist Hanger
- All standard round holes should be filled with either 2.65 x 40mm or 2.8 x 40mm or 3.4 x 35mm ring-shank nails or 3.75 x 30mm square twist nails.
- Fill diamond shaped holes for enhanced installation to I-Joist with backer blocks or solid LVL or Glulam headers.
- The TIJs unique hands free design locates the hanger on I-Joist headers leaving the installer with both hands free for easier installation.
SPECIFICATION
- 0.7mm pre galvanised mild steel EN 10346 DX51D Z275.
I-Joist-Hangers_data_sheet.pdf
Brand: TECO
Model: US5x100
Delivery Time: In stock, 1-2 days
5x100mm Ultimate Wood Screws - tempered and waxed high quality zinc plated steel, self-centering, self-countersinking, stick fit wood screws with slotted shank for reduced wood splitting and a sharp point for rapid starting with minimum force.CharacteristicsTempered and waxed high quality zinc ..
£11.29
£13.55 inc VAT
Brand: TECO
Model: FHM50/175
Delivery Time: In stock, 1-2 days
50mm x 175mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£2.28
£2.74 inc VAT
Brand: TECO
Model: TCSS 38mm M10
Delivery Time: In stock, 1-2 days
Diameter: 38mmTeeth Size: 0.9mm38mm M10 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.26
£0.31 inc VAT
Brand: TECO
Model: NUTFBZPM6
Delivery Time: In stock, 1-2 days
M6 Zinc Plated Hex Full Nuts for use with bolts and studding. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa...
£3.25
£3.90 inc VAT
Brand: TECO
Model: GTS - 50x300
Delivery Time: In stock, 1-2 days
50mm x 300mm Girder Truss Shoe is especially designed for supporting trussed rafters. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The hanger includes a base tag which can significan..
£2.24
£2.69 inc VAT
Brand: TECO
Model: LD600F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 600mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centre..
£1.04
£1.25 inc VAT