TRS Restraint Strap 800mm Bent 100mm
TRS Restraint Strap 800mm Bent 100mm
Price: £1.45 (£1.74 inc VAT)
- Product Code: A1-5801
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: TRS800B100
- Weight: 296.00g
TRS Restraint Strap 800mm Bent 100mm
Length: 800mm
Width: 36mm
Thickness: 1.4mm
Weight: 296g
800mm bent 100mm Ron Sammons strap is a lightweight restraint strap that can be used instead of a traditional Heavy Duty Strap to provide lateral restraint of roof trusses, rafters and joists tied to masonry and for vertical applications such as holding down the wall plate. Designed to The Building Regulations BS 5268 Part 3 and other building standards for lateral restraint.
CHARACTERISTICS
- 1.4mm thick x 36mm wide,
- Lightweight design makes it easier to handle,
- No need to notch joists making it easier and quicker to install,
- Easier to build into brickwork courses,
- More cost effective when compared to the traditional Heavy Duty Strap and Heavy Edge Rolled Strap,
- Galvanised steel EN 10346 G600,
- Manufactured to EN 845-1:2013,
- Manufactured to EN 845-1:2013.
APPLICATION
For horizontal applications, use min 6 no. 3.75 x 30mm square twist nails or equivalent fixed to timber joists/rafters.
Restraint-Straps.pdf
Brand: TECO
Model and Size: LD900T100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 900mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm..
£1.56
£1.87 inc VAT
Brand: TECO
Model and Size: AB150/150
Delivery Time: In stock, 1-2 days
150x150mm Heavy duty angle bracket is a versatile, general purpose 90-degree bracket used to strengthen timer joists, roof trusses etc. SpecificationPre Galvanised Mild Steel SD280GD+Z275Fixing InstructionsThe TECO Angle Bracket is the ultimate angle cleat using either Bolts, Coach..
£1.85
£2.22 inc VAT
Brand: TECO
Model and Size: WM50x275
Delivery Time: 2 - 4 days
50mm x 275mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£4.49
£5.39 inc VAT
Brand: TECO
Model and Size: MFT38/346BA - 38x154
Delivery Time: In stock, 1-2 days
38mm x 154mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base locati..
£2.25
£2.70 inc VAT
Brand: TECO
Model and Size: WSTDGM24
Delivery Time: In stock, 1-2 days
Diameter: 44mm M24 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galv..
£8.50
£10.20 inc VAT
Brand: TECO
Model and Size: WT-275/250
Delivery Time: In stock, 1-2 days
275mm Stainless Steel Housing Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from up to 150mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirements..
£73.68
£88.42 inc VAT