38x300mm Girder Truss Shoe
38x300mm Girder Truss Shoe
Price: £2.24 (£2.69 inc VAT)
- Product Code: A1-5007
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: GTS - 38x300
- Weight: 296.00g
38x300mm Girder Truss Shoe
Width: 38mm
Height: 300mm
Thickness: 1.2mm
Weight: 296g
38mm x 300mm Girder Truss Shoe is especially designed for supporting trussed rafters. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The hanger includes a base tag which can significantly contribute to faster and more accurate installation and to avoid unnecessary rotation. This base tag can easily be bent where necessary. The girder shoe offers long term safe working load of 7.27kN at 1.5mm deflection. The Girder Truss Shoes have been tested by Ceram Research - the test results are available upon request.
SPECIFICATION
- Especially designed for supporting trussed rafters,
- Tag on the base of the hanger helps avoid rotation and aids fast, accurate location,
- The Tag can easily be bent if not required.
- Bearing 85mm,
- Safe Working Load 7.55kN,
- Pre Galvanised Mild Steel to BS EN 10327:2004 DX51D+Z275
- Also available in Stainless Steel.
- Tested by Ceram Research.
It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
Girder-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: NP103x152
Delivery Time: In stock, 1-2 days
103x152mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropri..
£82.50
£99.00 inc VAT
Brand: TECO
Model and Size: MMG2.4
Delivery Time: In stock, 1-2 days
Galvanised Mini Mesh Beads are for internal thin-coat plaster applications. Mini Mesh Bead is used to reinforce and protect one-coat finish or plaster or corners at its weakest point on internal walls and plasterboard. The Mini Mesh bead had a greater area of expanded metal therefore gives a better ..
£1.30
£1.56 inc VAT
Brand: TECO
Model and Size: WM44x225
Delivery Time: 2 - 4 days
44mm x 225mm Welded Masonry Joist Hanger is designed to support 225mm high timber joist. The joist hanger's actual height is 215mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£2.48
£2.98 inc VAT
Brand: TECO
Model and Size: TDS100/50
Delivery Time: In stock, 1-2 days
100mm Timber Drive Screw is a heavy duty fixing that requires no pre-drilling. Suitable for many timber to timber applications. FeaturesHeat treated shank for extra strength.Green organic coating.Each pack comes complete with driver.InstallationScrew directly into timber, no pre dril..
£20.93
£25.12 inc VAT
Brand: TECO
Model and Size: ERSS3
Delivery Time: In stock, 1-2 days
Stainless Steel External Render Stop Bead is predominantly used to form a neat bell shaped edge at the bottom of an external render finish, thus protecting the edge and acting as a runoff for when rainfall occurs. Use on traditional wet 2 or 3 coat plaster application. Galvanised product to be used ..
£4.91
£5.89 inc VAT
Brand: TECO
Model and Size: FHMR47X100R115
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.31
£3.97 inc VAT