Damp Proof Membrane - DPM - 4x25m Roll
Damp Proof Membrane - DPM - 4x25m Roll
Price: £69.00 (£82.80 inc VAT)
- Product Code: A1-5633
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: DPM300B
- Weight: 25,000.00g
Damp Proof Membrane - DPM - 4x25m Roll
Length: 25000mm
Width: 4000mm
Thickness: 0.3mm
Weight: 25000g
Damp Proof Membrane is intended for use within solid concrete floors to prevent the rise of moisture or damp through structure flooring. Suitable for most construction damp proofing requirements. The DPM can be used as either below the slab application, directly below the flooring surface or in a sandwich construction, between base concrete and the screed. Manufactured from recycled polythene to meet PIFA and BBA standards.
Specification
- Manufactured to both BBA and PIFA requirements.
- 1200 gauge (300 micron).
- 4m x 25m.
- High puncture resistance.
Installation
- Unless the application surface is smooth it should be blinded with compacted soft sand to guarantee a soft bed, free from any objects that may puncture the membrane during installation or when concrete is applied.
- It is recommended that the DPM should be covered with a protective layer or screed as soon as possible after the membrane has been installed.
- Care should be taken when applying concrete or screed on top of the DPM to avoid stretching or the DPM being displaced.
- When joining two sheets a minimum overlap of 150mm should be provided between each of the sheets.
- For the best waterproof protection when making a join a double welted fold should be formed between the joining sheets. This should be formed by an overlap of 300mm from both sheets. Alternatively the 150mm overlap can be sealed with 100mm wide jointing tape.
- Any Punctures in the membrane should be patched with sheets of identical thickness lapped at least 150mm away from the perforation edge and sealed with double sided pressure sensitive tape.
- When installed within structures Damp Proof Membrane should be linked to the Damp Proof Course within the structure walls to from a continuous damp proof barrier throughout the structure.
Note: Not recommended for use as a general gas proof barrier system on Brownfield sites or in applications where gases such as radon are present.
Brand: TECO
Model and Size: AB60
Delivery Time: In stock, 1-2 days
60x40mm Heavy duty angle bracket is a versatile, general purpose 90-degree bracket used to strengthen timer joists, roof trusses etc. SpecificationPre Galvanised Mild Steel SD280GD+Z275Fixing InstructionsThe TECO Angle Bracket is the ultimate angle cleat using either Bolts, Co..
£0.88
£1.06 inc VAT
Brand: TECO
Model and Size: MFT47/504BA - 47x229
Delivery Time: In stock, 1-2 days
47mm x 229mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base l..
£3.05
£3.66 inc VAT
Brand: TECO
Model and Size: EB3x10
Delivery Time: In stock, 1-2 days
10mm Galvanised Steel Plasterboard Edge Bead that is used to reinforce plasterboard edges by enclosing them in a rotective steel enclosure. It can be used with thin coat plaster or drylining paper tape.Specification Galvanised steel EN 10346 DX51D Z275..Installation Use appropriate fixings..
£2.93
£3.52 inc VAT
Brand: TECO
Model and Size: TCSS 63mm M12
Delivery Time: In stock, 1-2 days
Diameter: 63mmTeeth Size: 1.2mm63mm M12 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.44
£0.53 inc VAT
Brand: TECO
Model and Size: CSHBZPM12x260
Delivery Time: In stock, 1-2 days
12mm - 260mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied com..
£37.13
£44.56 inc VAT
Brand: TECO
Model and Size: FHMST215
Delivery Time: 2 - 4 days
Single Piece Masonry Hanger Lock Plate is an additional element to use with the FHM Single Piece Joist Hanger and the WM Welded Masonry Joist Hanger. This plate is easily be transformed into a hook over joist hanger. No special tools or rivets are required. Just insert Lock ..
£1.13
£1.36 inc VAT