50mm M12mm Galvanised Steel Double Sided Tooth Plate Timber Connector
50mm M12mm Galvanised Steel Double Sided Tooth Plate Timber Connector
Price: £0.27 (£0.32 inc VAT)
- Product Code: A1-5324
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: TCDS 50mm M12
- Weight: 14.00g
50mm M12mm Galvanised Steel Double Sided Tooth Plate Timber Connector
Weight: 14g
Diameter: 50mm
Teeth Size: 0.9mm
50mm M12 Double Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are produced from pre-galvanised steel, in accordance to the BS EN 10327:2004 DX51D+Z275, but also available in stainless steel option. All sizes are suitable for standard M 12 holes size, but M10 and M16 are also available.
SPECIFICATION
All the products are manufactured in accordance with the BS EN 912:2000.
Brand: TECO
Model: WB30x2.5
Delivery Time: In stock, 1-2 days
30x2.5 galvanised steel water bar for fitting into door sills for weather protection. Galvanised steel EN 10346 DX51D Z275. Traditionally used with wooden doors, the water bar is fitted into the threshold so that the front door closes against it, sealing any gaps and preventing wind and rain from en..
£3.61
£4.33 inc VAT
Brand: TECO
Model: WTGP-200/50
Delivery Time: In stock, 1-2 days
200mm Stainless Steel General Purpose Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:20..
£13.31
£15.97 inc VAT
Brand: TECO
Model: WSTDGM24
Delivery Time: In stock, 1-2 days
Diameter: 44mm M24 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galv..
£8.10
£9.72 inc VAT
Brand: TECO
Model: HD2000F
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 2000mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.INSTALLAT..
£6.60
£7.92 inc VAT
Brand: TECO
Model: WS75x200S100
Delivery Time: 2 - 4 days
Straddle: 100mm75mm x 200mm Masonry Straddle Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The Masonry Straddle hanger is two hangers joined together by a plate on the masonry flange to enable exact alignment of two joists positioned..
£12.30
£14.76 inc VAT
Brand: TECO
Model: LD750T100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 750mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm..
£1.37
£1.64 inc VAT