76mm M12mm Galvanised Steel Double Sided Tooth Plate Timber Connector
76mm M12mm Galvanised Steel Double Sided Tooth Plate Timber Connector
Price: £1.00 (£1.20 inc VAT)
- Product Code: A1-5329
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: TCDS 76mm M12
- Weight: 43.00g
76mm M12mm Galvanised Steel Double Sided Tooth Plate Timber Connector
Weight: 43g
Diameter: 76mm
Teeth Size: 1.2mm
76mm M12 Double Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are produced from pre-galvanised steel, in accordance to the BS EN 10327:2004 DX51D+Z275, but also available in stainless steel option. All sizes are suitable for standard M 12 holes size, but M10 and M16 are also available.
SPECIFICATION
All the products are manufactured in accordance with the BS EN 912:2000.
Brand: TECO
Model: TCSS 50mm M12
Delivery Time: In stock, 1-2 days
Diameter: 50mmTeeth Size: 0.9mm50mm M12 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.29
£0.35 inc VAT
Brand: TECO
Model: SRTCSS 102mm
Delivery Time: In stock, 1-2 days
Diameter: 102mm102mm Stainless Steel Split Ring Timber Connector is designed for heavy shear loads in timber to timber connections.The Split Ring with the bevelled inside and outside face makes it easier to insert in the pre-cut grooves and also gives greater load capacity.The Ring is..
£20.73
£24.88 inc VAT
Brand: TECO
Model: WSQPBZPM16
Delivery Time: In stock, 1-2 days
M16 Bright Zinc plated Square Plate Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. Thickness 3mm. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not u..
£17.50
£21.00 inc VAT
Brand: TECO
Model: LD600T150
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 600mm Twisted 150mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm..
£1.04
£1.25 inc VAT
Brand: TECO
Model: WM75x175
Delivery Time: 2 - 4 days
75mm x 175mm Welded Masonry Joist Hanger is designed to support 175mm high timber joist. The joist hanger's actual height is 165mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£4.59
£5.51 inc VAT
Brand: TECO
Model: TFT75
Delivery Time: In stock, 1-2 days
75mm Timber Frame Ties are suitable for tying masonry outer cladding to softwood structural framework of domestic dwellings and industrial/commercial buildings up to 4 storeys and not greater than 15m in height. Suitable at a density of 4.4 ties per square meter for buildings anywhere in the South E..
£0.33
£0.40 inc VAT