Drywall Screws 3.5x32mm - box of 1000

Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be ..

50x65mm Mini Mini Joist Hanger is a timber to timber joist hanger suitable for light duty applications such as trimmers, ceiling joists and decking. The hanger is produced from 1mm thick pre-galvanised mild steel. The tag on the base of the hanger helps avoid rotation and aids fast, accurate locatio..

200mm Starter Ties are used where new walls are being built directly from existing brickwork. There is a drip feature for use where there is a cavity and a new wall needs to be built. Grade 1.4301 austenitic stainless steel to EN 10088-2. Features Stainless steel, Diameter 4mm,Supplied complete with..

Mild Steel Screw Ties are used to tie timber door and window frames to adjacent brickwork. Zinc and yellow passivated mild steel. Threaded one end. Screw directly into timber using a small pilot hole if required.  - 5mm..

Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be ..

38x600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to  EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support. This joist hanger ls..