125x140mm Multifunctional Joist Hanger
125x140mm Multifunctional Joist Hanger
Price: £2.58 (£3.10 inc VAT)
- Product Code: A1-5272
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: MFT125/404BA - 125x140
- Weight: 501.00g
125x140mm Multifunctional Joist Hanger
Width: 125mm
Height: 140mm
Thickness: 2mm
Weight: 501g
125mm x 140mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed. Long term safe working load = 8.25 kN.
FIXING INSTRUCTIONS for 125x140mm Multifunctional Joist Hanger
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model: WM125x200
Delivery Time: 2 - 4 days
125mm x 200mm Welded Masonry Joist Hanger is designed to support 200mm high timber joist. The joist hanger's actual height is 190mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£5.18
£6.22 inc VAT
Brand: TECO
Model: CCU
Delivery Time: In stock, 1-2 days
Universal Closers are used for eliminating damp and cold bridging around doors, windows and sills. This reduces installation time, and helps to achieve airtightness requirements. FeaturesTo close the cavity at external doors, window jambs and sills. To provide thermal insulation. To provide a d..
£9.51
£11.41 inc VAT
Brand: TECO
Model: FHM50/125
Delivery Time: In stock, 1-2 days
50mm x 125mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£2.07
£2.48 inc VAT
Brand: TECO
Model: LD1200T100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 1200mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm off..
£2.09
£2.51 inc VAT
Brand: TECO
Model: HWTNT125
Delivery Time: 2 - 3 Days
125mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONA..
£4.86
£5.83 inc VAT
Brand: TECO
Model: MBS3x16
Delivery Time: In stock, 1-2 days
16mm Stainless Steel Movement Mesh Beads are used to overcome movement tolerances in plaster and render finishes minimising racking in finished coat. It can also be used to act as a stop barrier for when a change in finish is required or type of render finish. 3m length.Installation Use ap..
£22.31
£26.77 inc VAT