90x285mm Woody No Tag Joist Hanger
90x285mm Woody No Tag Joist Hanger
Price: £0.60 (£0.72 inc VAT)
- Product Code: A1-5036
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: WNT - 90x285
- Weight: 192.00g
90x285mm Woody No Tag Joist Hanger
Width: 90mm
Height: 285mm
Thickness: 0.8mm
Weight: 192g
90mm x 285mm Woody No Tag Joist Hanger is produced from 0.8mm thick pre-galvanised mild steel in accordance with the BS EN 10327:2004 DX51D+Z275 specifications. The hangers have been accordingly tested by Ceram Research, whereas the test results are available upon request. Also available in Stainless Steel. Long term safe working load = 6 kN.
tag_install.png)
FIXING INSTRUCTIONS for 90x285mm Woody No Tag Joist Hanger
- All holes should be nailed using 30 x 3.75 square twist nails or equivalent, for stainless steel products use 30 x 3.75 stainless steel annular ring shank nails.Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
SPECIFICATION
- Joist bearing 60mm,
- Also available in Stainless Steel,
- Tested by Ceram Research.
Timber-to-Timber-Joist-Hangers.pdf
Brand: TECO
Model: TCDS 38mm M10
Delivery Time: In stock, 1-2 days
Diameter: 38mmTeeth Size: 0.9mm38mm M10 Double Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.29
£0.35 inc VAT
Brand: TECO
Model: NP85x87
Delivery Time: In stock, 1-2 days
85x87mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropriate fix..
£46.74
£56.09 inc VAT
Brand: TECO
Model: WM63x150
Delivery Time: 2 - 4 days
63mm x 150mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£4.30
£5.16 inc VAT
Brand: TECO
Model: FHMR47X125R115
Delivery Time: In stock, 1-2 days
The Masonry Return Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The return adds additional lateral support by wrapping around the back of the masonry or timber. They have a 25mm drop on the return flange as standard but many special..
£3.50
£4.20 inc VAT
Brand: TECO
Model: TCSS 38mm M12
Delivery Time: In stock, 1-2 days
Diameter: 38mmTeeth Size: 0.9mm38mm M 12 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are ..
£0.33
£0.40 inc VAT
Brand: TECO
Model: WSTDGM24
Delivery Time: In stock, 1-2 days
Diameter: 44mm M24 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galv..
£8.50
£10.20 inc VAT