Light Duty Restraint Strap 1200mm Bent 100mm
Light Duty Restraint Strap 1200mm Bent 100mm
Price: £2.20 (£2.64 inc VAT)
- Product Code: A1-5358
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: LD1200B100
- Weight: 610.00g
Light Duty Restraint Strap 1200mm Bent 100mm
Length: 1200mm
Width: 28mm
Thickness: 2.4mm
Weight: 610g
Galvanised Light Duty Restraint Strap 1200mm Bent 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.
SPECIFICATION
The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.
Straps can be ordered to any length up to 15m.
Restraint-Straps.pdf
Brand: TECO
Model: EMLS8x2
Delivery Time: In stock, 1-2 days
Gauge: 0.4mmHole length: 20mmHole width: 10mm 8x2 Stainless Steel Expanded Metal Lath Sheet is mainly used for internal and external plaster when applied on suspended ceilings and walls. It is also suitable for encasing steel columns and beams, assisting in the protection from fire. Made of Grade 1...
£30.68
£36.82 inc VAT
Brand: TECO
Model: LL - 76x600
Delivery Time: In stock, 1-2 days
76mm x 600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. It is especially designed for loft conversion projects. This joist hanger ls also available in stainless steel. The product also off..
£4.76
£5.71 inc VAT
Brand: TECO
Model: WTDT-250/250
Delivery Time: In stock, 1-2 days
Stainless Steel Double Triangle Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirements o..
£108.00
£129.60 inc VAT
Brand: TECO
Model: LL - 38x600
Delivery Time: In stock, 1-2 days
38x600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support. This joist hanger ls..
£4.08
£4.90 inc VAT
Brand: TECO
Model: SBG3
Delivery Time: In stock, 1-2 days
Galvanised Skim Angle Bead is for use on plasterboard or aerated blocks. Designed for standard single coat plasterwork for internal thin-coat plaster application, used to reinforce and protect plaster on corners and reveals at its weakest points.Specification Galvanised steel EN 10346 DX51..
£1.80
£2.16 inc VAT
Brand: TECO
Model: LD600F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 600mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centre..
£1.10
£1.32 inc VAT