Light Duty Restraint Strap 900mm Bent 100mm
Light Duty Restraint Strap 900mm Bent 100mm
Price: £1.56 (£1.87 inc VAT)
- Product Code: A1-5386
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: LD900B100
- Weight: 457.00g
Light Duty Restraint Strap 900mm Bent 100mm
Length: 900mm
Width: 28mm
Thickness: 2.4mm
Weight: 457g
Galvanised Light Duty Restraint Strap 900mm Bent 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.
SPECIFICATION
The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.
Straps can be ordered to any length up to 15m.
Restraint-Straps.pdf
Brand: TECO
Model: EMLS8x2
Delivery Time: In stock, 1-2 days
Gauge: 0.4mmHole length: 20mmHole width: 10mm 8x2 Stainless Steel Expanded Metal Lath Sheet is mainly used for internal and external plaster when applied on suspended ceilings and walls. It is also suitable for encasing steel columns and beams, assisting in the protection from fire. Made o..
£27.80
£33.36 inc VAT
Brand: TECO
Model: NUTFBZPM8
Delivery Time: In stock, 1-2 days
M8 Zinc Plated Hex Full Nuts for use with bolts and studding. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa...
£6.86
£8.23 inc VAT
Brand: TECO
Model: FFCS150
Delivery Time: In stock, 1-2 days
100mm Stainless Steel Frame Cramp is traditionally used for fixing wooden door and window frames into block work. Frame Cramps can also be used for restraining masonry to new and existing structures in non-structural applications and can easily be shot fired into steel work. Available in Grade ..
£0.88
£1.06 inc VAT
Brand: TECO
Model: MBS3x16
Delivery Time: In stock, 1-2 days
16mm Stainless Steel Movement Mesh Beads are used to overcome movement tolerances in plaster and render finishes minimising racking in finished coat. It can also be used to act as a stop barrier for when a change in finish is required or type of render finish. 3m length.Installation Use ap..
£22.31
£26.77 inc VAT
Brand: TECO
Model: MT200
Delivery Time: In stock, 1-2 days
200mm Movement Ties are designed to provide restraint in one direction and movement to allow for horizontal expansion and contraction. The Debonding Sleeve is located over the embedment detail to allow the tie to move. Typical usages are in areas where masonry is restrained to Steelwork columns and ..
£13.00
£15.60 inc VAT
Brand: TECO
Model: WM100x275
Delivery Time: 2 - 4 days
100mm x 275mm Welded Masonry Joist Hanger is designed to support 275mm high timber joist. The joist hanger's actual height is 265mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£9.38
£11.26 inc VAT