90x207mm Multifunctional Joist Hanger
90x207mm Multifunctional Joist Hanger
Price: £3.05 (£3.66 inc VAT)
- Product Code: A1-5266
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: MFT90/504BA - 90x207
- Weight: 624.00g
90x207mm Multifunctional Joist Hanger
Width: 90mm
Height: 207mm
Thickness: 2mm
Weight: 624g
90mm x 207mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed. Long term safe working load = 10.45 kN.
FIXING INSTRUCTIONS for 90x207mm Multifunctional Joist Hanger
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model: WR50X225R100
Delivery Time: 2 - 4 days
50mm x 225mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£4.70
£5.64 inc VAT
Brand: TECO
Model: WR44X250R100
Delivery Time: 2 - 4 days
44mm x 250mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£4.98
£5.98 inc VAT
Brand: TECO
Model: P8X50
Delivery Time: In stock, 1-2 days
8mm Universal Nylon Plug is a standard plug for 8mm hole diameter and 41mm in length. Suitable for hollow and solid base materials. FeaturesAnchor hole size - 8mmPlug length - 41mmMin. anchor hole length - 55mmWood screw size - 4.5mm to 6mm ..
£0.10
£0.12 inc VAT
Brand: TECO
Model: WM75x150
Delivery Time: 2 - 4 days
75mm x 150mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£4.43
£5.32 inc VAT
Brand: TECO
Model: WR44X200R100
Delivery Time: 2 - 4 days
44mm x 200mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£4.60
£5.52 inc VAT
Brand: TECO
Model: PBERS12/22
Delivery Time: In stock, 1-2 days
Plaster depth 12-22mm uPVC Plaster External Render Stop Bell Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be nece..
£4.44
£5.33 inc VAT