38x100mm Mini Girder Truss Shoe
38x100mm Mini Girder Truss Shoe
Price: £1.06 (£1.27 inc VAT)
- Product Code: A1-13
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: MGTS - 38x100
- Weight: 211.00g
38x100mm Mini Girder Truss Shoe
Width: 38mm
Height: 100mm
Thickness: 1.2mm
Weight: 211g
38mm x100mm Mini Girder Truss Shoe is a Face Fix Timber Hanger with a 85mm bearing and substantial safe working load of 5.25kN. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The TECO Mini Girder Truss Shoe is for short span, mono or in-fill trusses 100mm deep. The hanger has base tag that would significantly contribute to faster and more accurate installation and help to avoid unnecessary rotation.
SPECIFICATION
- Face Fix Timber Hanger,
- Tag on the base of the hanger helps avoid rotation and aids fast, accurate location,
- The Tag can easily be bent if not required.
- Bearing 85mm,
- Safe Working Load 5.25kN,
- Pre Galvanised Mild Steel to BS EN 10327:2004 DX51D+Z275
- Also available in Stainless Steel.
- Tested by Ceram Research.
FIXING INSTRUCTIONS
All holes should be nailed using 30 x 3.75 square twist nails or equivalent.
Girder-Hangers_data_sheet.pdf
Brand: TECO
Model: ST150
Delivery Time: In stock, 1-2 days
Mild Steel Screw Ties are used to tie timber door and window frames to adjacent brickwork. Zinc and yellow passivated mild steel. Threaded one end. Screw directly into timber using a small pilot hole if required. - 5mm..
£35.00
£42.00 inc VAT
Brand: TECO
Model: US4x60
Delivery Time: In stock, 1-2 days
4x60mm Ultimate Wood Screws - tempered and waxed high quality zinc plated steel, self-centering, self-countersinking, stick fit wood screws with slotted shank for reduced wood splitting and a sharp point for rapid starting with minimum force.CharacteristicsTempered and waxed high quality zinc p..
£8.91
£10.69 inc VAT
Brand: TECO
Model: LD1000B100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 1000mm Bent 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres h..
£1.81
£2.17 inc VAT
Brand: TECO
Model: HWTNT76
Delivery Time: 2 - 3 Days
76mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONAl..
£4.49
£5.39 inc VAT
Brand: TECO
Model: HFR220
Delivery Time: In stock, 1-2 days
220mm Helical Flat Roof Fixing is a hammer driven fixing for securing composite panels to wooden battens. Bright zinc plated. For 151-181mm thick panels. Features8mm diameter. Large 20mm head.Quick installation - no drilling, no need for screws. Unique one piece to prevent ..
£0.73
£0.88 inc VAT
Brand: TECO
Model: WM90x150
Delivery Time: 2 - 4 days
90mm x 150mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£4.45
£5.34 inc VAT