200mm Movement Tie with Sleeve - pack of 10
200mm Movement Tie with Sleeve - pack of 10
Price: £13.00 (£15.60 inc VAT)
- Product Code: A1-5526
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: MT200
- Weight: 610.00g
200mm Movement Tie with Sleeve - pack of 10
Length: 200mm
Width: 19mm
Weight: 610g
200mm Movement Ties are designed to provide restraint in one direction and movement to allow for horizontal expansion and contraction. The Debonding Sleeve is located over the embedment detail to allow the tie to move. Typical usages are in areas where masonry is restrained to Steelwork columns and in long spans of brickwork where movement joints are required. 200mm ties can also be ordered without a sleeve.
Features
- Movement Ties come complete with sleeve.
- Additional sleeves available to order.
Specification
- Grade 1.4301 austenitic stainless steel to EN 10088-2.
Installation
- These products are designed to provide restraint in one direction and movement to allow for horizontal expansion and contraction. The Debonding Sleeve is located over the embedment detail to allow the tie to move
Brand: TECO
Model: LD750T100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 750mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm..
£1.30
£1.56 inc VAT
Brand: TECO
Model: NP41x152
Delivery Time: In stock, 1-2 days
41x152mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropria..
£27.56
£33.07 inc VAT
Brand: TECO
Model: TDS200/10
Delivery Time: In stock, 1-2 days
200mm Timber Drive Screw is a heavy duty fixing that requires no pre-drilling. Suitable for many timber to timber applications. FeaturesHeat treated shank for extra strength.Green organic coating.Each pack comes complete with driver.InstallationScrew directly into timber, no pre dril..
£10.91
£13.09 inc VAT
Brand: TECO
Model: MFT38/504BA - 38x233
Delivery Time: In stock, 1-2 days
38mm x 233mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base locati..
£3.05
£3.66 inc VAT
Brand: TECO
Model: SVM
Delivery Time: In stock, 1-2 days
75mm Stainless Steel Soffit Vent Mesh is for use in new build properties. It is used over vents in soffits to allow air flow to prevent condensation but prevents access to birds and insects. Made from Grade 1.4301 Austenitic Stainless Steel to EN 10088-2. Gloves should be worn as edges may be sharp...
£78.51
£94.21 inc VAT
Brand: TECO
Model: WM100x125
Delivery Time: 2 - 4 days
100mm x 125mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the tim..
£4.38
£5.26 inc VAT