Light Duty Restraint Strap 1200mm Bent 100mm Twisted 100mm
Light Duty Restraint Strap 1200mm Bent 100mm Twisted 100mm
Price: £2.29 (£2.75 inc VAT)
- Product Code: A1-5359
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: LD1200B100T
- Weight: 610.00g
Light Duty Restraint Strap 1200mm Bent 100mm Twisted 100mm
Length: 1200mm
Width: 28mm
Thickness: 2.4mm
Weight: 610g
Galvanised Light Duty Restraint Strap 1200mm Bent 100mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry and also for horizontal restraint. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.
SPECIFICATION
The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.
Restraint-Straps.pdf
Brand: TECO
Model and Size: WSQPBZPM20
Delivery Time: In stock, 1-2 days
M20 Bright Zinc plated Square Plate Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. Thickness 3mm. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not u..
£22.30
£26.76 inc VAT
Brand: TECO
Model and Size: WM63x175
Delivery Time: 2 - 4 days
63mm x 175mm Welded Masonry Joist Hanger is designed to support 175mm high timber joist. The joist hanger's actual height is 165mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£4.45
£5.34 inc VAT
Brand: TECO
Model and Size: SVM
Delivery Time: In stock, 1-2 days
75mm Stainless Steel Soffit Vent Mesh is for use in new build properties. It is used over vents in soffits to allow air flow to prevent condensation but prevents access to birds and insects. Made from Grade 1.4301 Austenitic Stainless Steel to EN 10088-2. Gloves should be worn as edges may be sharp...
£78.51
£94.21 inc VAT
Brand: TECO
Model and Size: HB400
Delivery Time: In stock, 1-2 days
Herringbone Joist Strut HB400 provides the means to prevent sideways movement or the buckling of joists, a simple alternative to the labour intensive traditional timber noggins. Made from galvanised steel EN 10346 DX51D Z275. Joint centres - 400mm, Strut length - 480mm. Meets bracing requirements fo..
£0.46
£0.55 inc VAT
Brand: TECO
Model and Size: EMLG305
Delivery Time: In stock, 1-2 days
305mm Galvanised Coiled Mesh Lath is produced for brick and block work reinforcement. Primarily usage is to prevent cracking. SpecificationGalvanised steel EN 10346 DX51D Z275,Available in 20 metre coilsInstallation Overlap by a minimum of 75mm when joining two lengths toget..
£39.96
£47.95 inc VAT
Brand: TECO
Model and Size: WR100X200R100
Delivery Time: 2 - 4 days
100mm x 200mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but ..
£5.70
£6.84 inc VAT