80x550mm Multi Truss Girder Hanger
80x550mm Multi Truss Girder Hanger
Width: 80mm
Height: 550mm
Thickness: 3mm
Weight: 2920g
80mm x 550mm Multi Truss Girder Hanger is a Heavy Duty Girder to Girder Hanger produced from 3mm thick mild steel, which is galvanised upon production. This hanger offers substantial safe working load of 29kN, meaning there is no fear of the hanger breaking off, if the given load is respected. It is tested by BRE.

The bolts set include 120 mm thread 3 no. M20 x 180 XOX BZP Bolts, 3 no. M20 x 65mm BZP Round Washers and 3 no. M20 x 40mm galvanised Round Washers. Bought separately.
SPECIFICATION
- Galvanised after manufacture.
- 3mm thick.
- Safe Working Load 27kN,
- Holed for M20 bolts.
- Tested by BRE.
Brand: TECO
Model: HD1800B150
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1800mm Bent 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.APP..
£5.37
£6.44 inc VAT
Brand: TECO
Model: WM125x125
Delivery Time: 2 - 4 days
125mm x 125mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timber o..
£4.75
£5.70 inc VAT
Brand: TECO
Model: TRS1000B100
Delivery Time: In stock, 1-2 days
1000mm bent 100mm Ron Sammons strap is a lightweight restraint strap that can be used instead of a traditional Heavy Duty Strap to provide lateral restraint of roof trusses, rafters and joists tied to masonry and for vertical applications such as holding down the wall plate. Designed to The Building..
£1.92
£2.30 inc VAT
Brand: TECO
Model: WTGP-225/50
Delivery Time: In stock, 1-2 days
225mm Stainless Steel General Purpose Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirem..
£13.64
£16.37 inc VAT
Brand: TECO
Model: TCSS 63mm M10
Delivery Time: In stock, 1-2 days
Diameter: 63mmTeeth Size: 1.2mm63mm M10 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are produced from pre-gal..
£0.76
£0.91 inc VAT
Brand: TECO
Model: MFT100/346BA - 100x123
Delivery Time: In stock, 1-2 days
100mm x 123mm Multifunctional Joist Hanger 100 x 123mm is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It include..
£2.28
£2.74 inc VAT
