50x175mm Single Piece Masonry Hanger
50x175mm Single Piece Masonry Hanger
Price: £2.28 (£2.74 inc VAT)
- Product Code: A1-5228
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: FHM50/175
- Weight: 456.00g
50x175mm Single Piece Masonry Hanger
Width: 50mm
Height: 175mm
Thickness: 2.5mm
Weight: 456g
50mm x 175mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using appropriate fixings. The straight top flange and a lock plate allows the hanger to be transformed into a straddle or a hook over, with no special equipment required. Long term safe working load = 5.4 kN.
FIXING INSTRUCTIONS for 50x175mm Single Piece Masonry Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent. Stainless steel hangers shouldbe nailed using 30 x 3.75 annular ring shank nails.
- To provide lateral restraint HD straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dryslots.
- Use appropriate fixings.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainlesssteel products or vice versa.
- Use correct strength mortar as per British Standard.
SPECIFICATION
- Galvanised steel to EN 10346 DX51D Z600.
- Tested by CERAM Research Ltd Notification Body No.1289.
- Manufactured to EN 845-1:2013.
Masonry-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: HI300P
Delivery Time: In stock, 1-2 days
Scrolled Hot Dipped Galvanised Hip Irons provide a decorative restraint when bedding hip tiles. Available in a range of sizes and finishes. InstallationDue to the angle of the roof along the hip, a Hip Iron is fixed at the bottom of the hip first to support the weight of the hip tiles so ..
£1.94
£2.33 inc VAT
Brand: TECO
Model and Size: CSHBZPM12x220
Delivery Time: In stock, 1-2 days
12mm - 220mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied com..
£21.14
£25.37 inc VAT
Brand: TECO
Model and Size: FS75x600
Delivery Time: In stock, 1-2 days
75x75mm Spiked Post Shoe is used to hold fence posts above ground level, suitable for standard soil conditions. Galvanised and Powder Coated Brown colour. Shoe height: 150mm,Support height: 600mm..
£11.93
£14.32 inc VAT
Brand: TECO
Model and Size: WM63x200
Delivery Time: 2 - 4 days
63mm x 200mm Welded Masonry Joist Hanger is designed to support 200mm high timber joist. The joist hanger's actual height is 190mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£4.73
£5.68 inc VAT
Brand: TECO
Model and Size: WSTDGM10
Delivery Time: In stock, 1-2 days
Diameter: 20mm M10 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use gal..
£1.43
£1.72 inc VAT
Brand: TECO
Model and Size: WSS4x40
Delivery Time: In stock, 1-2 days
4x40mm Stainless Steel Wood screws - ideal for fixing stainless steel brackets and stainless steel mesh products when used with a stainless steel 18mm diameter washer. Grade 1.4301 austenitic stainless steel to EN 10088-2. Screw directly into timber using a small pilot hole if require..
£23.40
£28.08 inc VAT