75mm x 30m Stainless Steel Soffit Vent Mesh
75mm x 30m Stainless Steel Soffit Vent Mesh
Price: £78.51 (£94.21 inc VAT)
- Product Code: A1-5575
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: SVM
- Weight: 14,000.00g
75mm Stainless Steel Soffit Vent Mesh
Length: 30000mm
Width: 75mm
Weight: 14000g
75mm Stainless Steel Soffit Vent Mesh is for use in new build properties. It is used over vents in soffits to allow air flow to prevent condensation but prevents access to birds and insects. Made from Grade 1.4301 Austenitic Stainless Steel to EN 10088-2. Gloves should be worn as edges may be sharp.
Supplied in a box dispenser
Brand: TECO
Model: SRTCG 102mm
Delivery Time: In stock, 1-2 days
Diameter: 102mm102mm Galvanised Steel Split Ring Timber Connector is designed for heavy shear loads in timber to timber connections.The Split Ring with the bevelled inside and outside face makes it easier to insert in the pre-cut grooves and also gives greater load capacity.The Ring i..
£7.53
£9.04 inc VAT
Brand: TECO
Model: HWTNT63
Delivery Time: 2 - 3 Days
63mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONAl..
£4.61
£5.53 inc VAT
Brand: TECO
Model: WM44x175
Delivery Time: 2 - 4 days
44mm x 175mm Welded Masonry Joist Hanger is designed to support 175mm high timber joist. The joist hanger's actual height is 165mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£2.20
£2.64 inc VAT
Brand: TECO
Model: LD900F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 900mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres hol..
£1.65
£1.98 inc VAT
Brand: TECO
Model: WSTDGM8
Delivery Time: In stock, 1-2 days
Diameter: 16mm M8 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galv..
£0.90
£1.08 inc VAT
Brand: TECO
Model: ABLD
Delivery Time: In stock, 1-2 days
50x50mm Heavy duty angle bracket is a versatile, general purpose 90-degree bracket used to strengthen timer joists, roof trusses etc. SpecificationPre Galvanised Mild Steel SD280GD+Z275Fixing InstructionsThe TECO Angle Bracket is the ultimate angle cleat using either Bolts, Co..
£0.59
£0.71 inc VAT