215mm Single Piece Masonry Hanger Lock Plate Straddle
215mm Single Piece Masonry Hanger Lock Plate Straddle
Price: £1.13 (£1.36 inc VAT)
- Product Code: A1-5283
- Delivery Time: 2 - 4 days
- Brand: TECO
- Model: FHMST215
- Weight: 80.00g
Brand: TECO
Model: ERSG3
Delivery Time: In stock, 1-2 days
Galvanised External Render Stop Bead is predominantly used to form a neat bell shaped edge at the bottom of an external render finish, thus protecting the edge and acting as a runoff for when rainfall occurs. Use on traditional wet 2 or 3 coat plaster application. Galvanised product to be used ..
£2.53
£3.04 inc VAT
Brand: TECO
Model: AB50
Delivery Time: In stock, 1-2 days
50x15mm Heavy duty angle bracket is a versatile, general purpose 90-degree bracket used to strengthen timer joists, roof trusses etc. SpecificationPre Galvanised Mild Steel SD280GD+Z275Fixing InstructionsThe TECO Angle Bracket is the ultimate angle cleat using either Bolts, Co..
£0.88
£1.06 inc VAT
Brand: TECO
Model: LD800F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 800mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres hol..
£1.39
£1.67 inc VAT
Brand: TECO
Model: GTS - 76x300
Delivery Time: In stock, 1-2 days
76mm x 300mm Girder Truss Shoe is especially designed for supporting trussed rafters. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The hanger includes a base tag which can significan..
£3.33
£4.00 inc VAT
Brand: TECO
Model: TCW47
Delivery Time: In stock, 1-2 days
47mm Woody Truss Clips are used to fix trusses, girders and rafters to the wall plate. Installation prongs on the truss clip to aid location. These truss clips can withstand superior design loads. Made from galvanised steel EN 10346 DX51D Z275. Tested by CERAM Research Ltd. Long term safe ..
£0.31
£0.37 inc VAT
Brand: TECO
Model: WM63x275
Delivery Time: 2 - 4 days
63mm x 275mm Welded Masonry Joist Hanger is designed to support 275mm high timber joist. The joist hanger's actual height is 265mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£6.18
£7.42 inc VAT