150mm Damp Proof Course - DPC

150mm Damp Proof Course - DPC
Price: £5.09 (£6.11 inc VAT)
  • Product Code: A1-5638
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model: DPC150
  • Weight: 1,700.00g

150mm Damp Proof Course - DPC

Length: 30000mm
Width: 150mm
Weight: 1700g
150mm Damp Proof Course - DPC provides damp proof protection, preventing ingress of external moisture. Suitable for brick, block, stone or concrete walls. Suitable for vertical and horizontal applications.

Damp Proof Course installation 
 
Specification
  • 500mu.
  • Produced to BS 6515:84.
  • Suitable for withstanding a compressive load of up to 2.5 N/mm2 as long as no lateral load is applied.
Installation
  • Installation should be according to the code of practice CP102:1973 and normal DPC good practice procedures set in BS 5628 should be followed.
  • For internal walls, DPC should be installed at the base of load bearing walls and linked with any adjoining DPM.
  • The DPC should be at least the width the partition it is applied to and lapped by at least 100mm when two DPCs are joined and linked with any adjoining DPM. 
    Brand: TECO Model: NUTFBZPM10
    Delivery Time: In stock, 1-2 days
    M10 Zinc Plated Hex Full Nuts for use with bolts and studding. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa...
    £14.85
    £17.82 inc VAT
    Brand: TECO Model: MGTS - 38x100
    Delivery Time: In stock, 1-2 days
    38mm x100mm Mini Girder Truss Shoe is a Face Fix Timber Hanger with a 85mm bearing and substantial safe working load of 5.25kN. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The TECO Mini Girder Truss Sh..
    £1.06
    £1.27 inc VAT
    Brand: TECO Model: EMLG100
    Delivery Time: In stock, 1-2 days
    100mm Galvanised Coiled Mesh Lath is produced for brick and block work reinforcement. Primarily usage is to prevent cracking. SpecificationGalvanised steel EN 10346 DX51D Z275,Available in 20 metre coilsInstallation Overlap by a minimum of 75mm when joining two lengths together.Gloves should be worn..
    £12.79
    £15.35 inc VAT
    Brand: TECO Model: CSHBZPM10x240
    Delivery Time: In stock, 1-2 days
    10mm - 240mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied com..
    £24.85
    £29.82 inc VAT
    Brand: TECO Model: WTGP-225/50
    Delivery Time: In stock, 1-2 days
    225mm Stainless Steel General Purpose Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirem..
    £66.00
    £79.20 inc VAT
    Brand: TECO Model: LD750T100
    Delivery Time: In stock, 1-2 days
    Galvanised Light Duty Restraint Strap 750mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.SPECIFIC..
    £1.37
    £1.64 inc VAT