Stainless Steel External Render Stop (Bell Bead) - 3m length
Stainless Steel External Render Stop (Bell Bead) - 3m length
Price: £5.42 (£6.50 inc VAT)
- Product Code: A1-5540
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: ERSS3
- Weight: 560.00g
Stainless Steel External Render Stop (Bell Bead) - 3m length
Length: 3000mm
Weight: 560g
Stainless Steel External Render Stop Bead is predominantly used to form a neat bell shaped edge at the bottom of an external render finish, thus protecting the edge and acting as a runoff for when rainfall occurs. Use on traditional wet 2 or 3 coat plaster application. Galvanised product to be used in sheltered areas only, stainless steel for all other areas including coastal. Plaster depth 16 to 20mm, wing dimension 45mm.
Specification
- Stainless Steel External Render Stop (Bell Bead) - 3m.
Installation
- Use appropriate fixings.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
Brand: TECO
Model: RESINPS
Delivery Time: In stock, 1-2 days
300mm Polyester Resin is designed to aid and add strength to anchors or fixings, threaded studs, internal threaded sockets and rebar. Can be used in brickwork, concrete and most natural stone. Supplied with mixer nozzle. FeaturesStyrene free.Expansion free.Easy to dispense.Close spacing and edg..
£14.80
£17.76 inc VAT
Brand: TECO
Model: WSS4x30
Delivery Time: In stock, 1-2 days
4x30mm Stainless Steel Wood screws - ideal for fixing stainless steel brackets and stainless steel mesh products when used with a stainless steel 18mm diameter washer. Grade 1.4301 austenitic stainless steel to EN 10088-2. Screw directly into timber using a small pilot hole if require..
£21.60
£25.92 inc VAT
Brand: TECO
Model: CSHBZPM12x200
Delivery Time: In stock, 1-2 days
12mm - 200mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied com..
£11.16
£13.39 inc VAT
Brand: TECO
Model: LD220F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 220mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres hol..
£0.55
£0.66 inc VAT
Brand: TECO
Model: WM100x250
Delivery Time: 2 - 4 days
100mm x 250mm Welded Masonry Joist Hanger is designed to support 250mm high timber joist. The joist hanger's actual height is 240mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£6.70
£8.04 inc VAT
Brand: TECO
Model: MMG3
Delivery Time: In stock, 1-2 days
Galvanised Mini Mesh Beads are for internal thin-coat plaster applications. Mini Mesh Bead is used to reinforce and protect one-coat finish or plaster or corners at its weakest point on internal walls and plasterboard. The Mini Mesh bead had a greater area of expanded metal therefore gives a be..
£1.72
£2.06 inc VAT