Menu
Menu
Your Cart
Joist Hangers
Joist Hangers
stainless steel and galvanised metal lath sheets
restraint straps and bands

Heavy Duty Restraint Strap 1400mm Flat

Heavy Duty Restraint Strap 1400mm Flat
Price: £4.18 (£5.02 inc VAT)
  • Product Code: A1-5409
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model: HD1400F
  • Weight: 1,302.00g
Show other lengths

Need custom bends or twists?

Fill below and send for a quote.

Strap #1

/
Total length of the strap
mm
Length to
/
mm
angle
degrees
Quantity

Galvanised Heavy Duty Restraint Strap 1400mm Flat

Length: 1400mm
Width: 28mm
Thickness: 4mm
Weight: 1302g

Galvanised Heavy Duty Restraint Strap 1400mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.

INSTALLATION

For galvanised straps use min 7 no. 3.75 x 30 square twist nails or equivalent fixed to timber joists / rafters.

SPECIFICATION

The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.

Please note: 1-3 metre lengths come from a coil rather than a solid rigid bar. The physical characteristics of the metal mean that after a certain length they can bend rather than being flat rigid. It is not a question of any fault but rather the ‘nature of the beast’. The phrase: “straps are flat” is not misleading! It means they are not bent or twisted; at no point is there any claim that they are straight and true. Strap material is edge-coat galvanised which is required by the standard. This process, and the fact that the material is a coil does cause deflection, and the longer the length the more it is apparent.

Brand: TECO Model: MFT125/404BA - 125x140
Delivery Time: In stock, 1-2 days
125mm x 140mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base ..
£2.60
£3.12 inc VAT
Brand: TECO Model: WB30x2.5
Delivery Time: In stock, 1-2 days
30x2.5 galvanised steel water bar for fitting into door sills for weather protection. Galvanised steel EN 10346 DX51D Z275. Traditionally used with wooden doors, the water bar is fitted into the threshold so that the front door closes against it, sealing any gaps and preventing wind and rain from en..
£3.61
£4.33 inc VAT
Brand: TECO Model: WM100x300
Delivery Time: 2 - 4 days
100mm x 300mm Welded Masonry Joist Hanger is designed to support 300mm high timber joist. The joist hanger's actual height is 290mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£12.93
£15.52 inc VAT
Brand: TECO Model: PNP14
Delivery Time: In stock, 1-2 days
14mm Nylon Plug is a standard nylon plug for 14mm hole diameter and 70mm in length.  Suitable for solid base materials. FeaturesAnchor hole size - 14mmPlug length - 70mmMin. anchor hole length - 80mmWood screw size - 10mm to 12mm ..
£0.31
£0.37 inc VAT
Brand: TECO Model: FHM47/225
Delivery Time: In stock, 1-2 days
47mm x 225mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£2.82
£3.38 inc VAT
Brand: TECO Model: MMG2.4
Delivery Time: In stock, 1-2 days
Galvanised Mini Mesh Beads are for internal thin-coat plaster applications. Mini Mesh Bead is used to reinforce and protect one-coat finish or plaster or corners at its weakest point on internal walls and plasterboard. The Mini Mesh bead had a greater area of expanded metal therefore gives a better ..
£1.44
£1.73 inc VAT

Rate this product

Please login or register to review