50mm M12mm Stainless Steel Single Sided Tooth Plate Timber Connector
50mm M12mm Stainless Steel Single Sided Tooth Plate Timber Connector
Weight: 13g
Diameter: 50mm
Teeth Size: 0.9mm
Single Sided Stainless Steel Tooth Plate Timber Connector 50mm M12 is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. Most of the connectors are produced from pre-galvanised steel, in accordance to the BS EN 10327:2004 DX51D+Z275, but there is a number of timber connectors that are, like this one, made from stainless steel for added protection. All sizes are suitable for standard M 12 holes size, but M10 and M16 are also available.
SPECIFICATION
All the products are manufactured in accordance with the BS EN 912:2000.
Brand: TECO
Model: PB
Delivery Time: In stock, 1-2 days
7mm Anker-it Yellow Plug is a standard red coloured plastic plug for 7mm hole diameter and 37mm in length. FeaturesAnchor hole size - 7mmPlug length - 37mmMin. anchor hole length - 45mmWood screw size - 5mm to 6mm ..
£1.38
£1.66 inc VAT
Brand: TECO
Model: WR90X200R100
Delivery Time: 2 - 4 days
90mm x 200mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£5.70
£6.84 inc VAT
Brand: TECO
Model: CSHBZPM6x25
Delivery Time: In stock, 1-2 days
6mm - 25mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied complete w..
£31.80
£38.16 inc VAT
Brand: TECO
Model: TCW38
Delivery Time: In stock, 1-2 days
38mm Woody Truss Clips are used to fix trusses, girders and rafters to the wall plate. Installation prongs on the truss clip to aid location. These truss clips can withstand superior design loads. Made from galvanised steel EN 10346 DX51D Z275. Tested by CERAM Research Ltd. Long term safe ..
£0.33
£0.40 inc VAT
Brand: TECO
Model: STUDBZPM10
Delivery Time: In stock, 1-2 days
M10 Bright Zinc Plated Studding ( threaded bar), suitable for many applications. Supplied as standard in mild steel, high tensile available to order. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with sta..
£1.99
£2.39 inc VAT
Brand: TECO
Model: WM63x125
Delivery Time: 2 - 4 days
63mm x 125mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£4.36
£5.23 inc VAT



