130mm Starter Tie with plugs - pack of 10
130mm Starter Tie with plugs - pack of 10
Price: £14.13 (£16.96 inc VAT)
- Product Code: A1-5515
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: SST130
- Weight: 270.00g
130mm Starter Tie with plugs - pack of 10
Length: 130mm
Weight: 270g
130mm Starter Ties are used where new walls are being built directly from existing brickwork for use where there is a cavity. Grade 1.4301 austenitic stainless steel to EN 10088-2.
Features
- Stainless steel,
- Diameter 4mm,
- Supplied complete with nylon plug.
Specification
Grade 1.4301 austenitic stainless steel to EN 10088-2.
Installation
Plug and screw into existing masonry then build into new wall.
Brand: TECO
Model and Size: TCSS 63mm M12 SS
Delivery Time: In stock, 1-2 days
Diameter: 63mmTeeth Size: 1.2mmSingle Sided Stainless Steel Tooth Plate Timber Connector 63mm M12 is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity...
£3.20
£3.84 inc VAT
Brand: TECO
Model and Size: WM75x275
Delivery Time: 2 - 4 days
75mm x 275mm Welded Masonry Joist Hanger is designed to support 275mm high timber joist. The joist hanger's actual height is 265mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£6.18
£7.42 inc VAT
Brand: TECO
Model and Size: GTS - 100x300
Delivery Time: In stock, 1-2 days
100mm x 300mm Girder Truss Shoe is especially designed for supporting trussed rafters. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The hanger includes a base tag which can significantly contribute to f..
£3.65
£4.38 inc VAT
Brand: TECO
Model and Size: NP41x152
Delivery Time: In stock, 1-2 days
42x175mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropria..
£46.74
£56.09 inc VAT
Brand: TECO
Model and Size: ARRM
Delivery Time: In stock, 1-2 days
1m x 50m Alkaline Resistant Render Mesh reinforcing mesh which is made from woven fibre-glass yarns and coated with an alkaline resistant latex. This coating prevents the alkaline present in cements from degrading the glass fibre, resulting in reduced strength. The mesh is ideal for use in cons..
£56.14
£67.37 inc VAT
Brand: TECO
Model and Size: ERSS3
Delivery Time: In stock, 1-2 days
Stainless Steel External Render Stop Bead is predominantly used to form a neat bell shaped edge at the bottom of an external render finish, thus protecting the edge and acting as a runoff for when rainfall occurs. Use on traditional wet 2 or 3 coat plaster application. Galvanised product to be used ..
£4.91
£5.89 inc VAT