275mm Starter Tie with plugs - pack of 10
275mm Starter Tie with plugs - pack of 10
Price: £23.25 (£27.90 inc VAT)
- Product Code: A1-5520
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: SST275
- Weight: 520.00g
275mm Starter Tie with plugs - pack of 10
Length: 275mm
Weight: 520g
275mm Starter Ties are used where new walls are being built directly from existing brickwork. There is a drip feature for use where there is a cavity and a new wall needs to be built. Grade 1.4301 austenitic stainless steel to EN 10088-2.
Features
- Stainless steel,
- Diameter 4mm,
- Supplied complete with nylon plug.
Specification
Grade 1.4301 austenitic stainless steel to EN 10088-2.
Installation
Plug and screw into existing masonry then build into new wall.
Brand: TECO
Model: LD450B100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 450mm Bent 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset ..
£0.82
£0.98 inc VAT
Brand: TECO
Model: WT-225/250
Delivery Time: In stock, 1-2 days
225mm Stainless Steel Housing Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirement..
£36.00
£43.20 inc VAT
Brand: TECO
Model: LL - 38x450
Delivery Time: In stock, 1-2 days
38x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support. ..
£3.41
£4.09 inc VAT
Brand: TECO
Model: MT200
Delivery Time: In stock, 1-2 days
200mm Movement Ties are designed to provide restraint in one direction and movement to allow for horizontal expansion and contraction. The Debonding Sleeve is located over the embedment detail to allow the tie to move. Typical usages are in areas where masonry is restrained to Steelwork columns and ..
£13.00
£15.60 inc VAT
Brand: TECO
Model: WM125x225
Delivery Time: 2 - 4 days
125mm x 225mm Welded Masonry Joist Hanger is designed to support 225mm high timber joist. The joist hanger's actual height is 215mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£5.63
£6.76 inc VAT
Brand: TECO
Model: WNT - 75x295
Delivery Time: In stock, 1-2 days
75mm x 295mm Woody No Tag Joist Hanger is produced from 0.8mm thick pre-galvanised mild steel in accordance with the BS EN 10327:2004 DX51D+Z275 specifications. The hangers have been accordingly tested by Ceram Research, whereas the test results are available upon request. Also available in Stainles..
£0.61
£0.73 inc VAT