75mm x 200mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..

3.5x50mm Drywall Screws are high quality screws designed for fixing plasterboard. Black phosphate finish. Features - 3.5mmBugle head  Sharp point.InstallationScrew directly into timber, no pre drilling required. ..

75mm x 250mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..

Galvanised Light Duty Restraint Strap 900mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres hol..

90mm x 125mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..

Galvanised Hex mesh Netting is used for floor screed reinforcement, wall plaster reinforcement and roof insulation. Also can be used for fencing. Made from hot dipped galvanised steel prior to weaving. Gloves should be worn as edges will be sharp.Hex mesh is formed by twisting two adjacent wires at ..