5x40mm Ultimate Wood Screws - box of 200
5x40mm Ultimate Wood Screws - box of 200
Price: £9.09 (£10.91 inc VAT)
- Product Code: A1-5822
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: US5x40
Brand: TECO
Model: FS50x450
Delivery Time: In stock, 1-2 days
50x50mm Spiked Post Shoe is used to hold fence posts above ground level, suitable for standard soil conditions. Galvanised and Powder Coated Brown colour. Shoe height: 150mm, Support height: 450mm..
£11.11
£13.33 inc VAT
Brand: TECO
Model: CSHBZPM6x25
Delivery Time: In stock, 1-2 days
6mm - 25mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied complete w..
£31.80
£38.16 inc VAT
Brand: TECO
Model: WTGP-225/50
Delivery Time: In stock, 1-2 days
225mm Stainless Steel General Purpose Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:20..
£14.20
£17.04 inc VAT
Brand: TECO
Model: HD1400B150
Delivery Time: In stock, 1-2 days
Galvanised Heavyt Duty Restraint Strap 1400mm Bent 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.AP..
£3.96
£4.75 inc VAT
Brand: TECO
Model: LD200B50
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 200mm Bent 50mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centre..
£0.53
£0.64 inc VAT
Brand: TECO
Model: WM125x150
Delivery Time: 2 - 4 days
125mm x 150mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£4.59
£5.51 inc VAT