uPVC Angle Bead - Plaster Depth 6-10mm
uPVC Angle Bead - Plaster Depth 6-10mm
Price: £3.43 (£4.12 inc VAT)
- Product Code: A1-5549
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: PB6/10
- Weight: 280.00g
uPVC Angle Bead 6-10mm
Length: 2500mm
Weight: 280g
Plaster depth 6-10mm uPVC Plaster Angle Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact resistant dry lining and wet plaster beads for internal or external use. uPVC Bead is supplied as standard in white, although many colours are available upon request by supplying us with the relevant RAL reference code.
Characteristics
- Plaster depth 2 to 3mm
- Simple installation (with plaster dabs or stainless steel fixings),
- No sharp edges, and safe to handle,
- Easy to cut,
- Non corrosive.
Brand: TECO
Model: GB490
Delivery Time: In stock, 1-2 days
Gallows Brackets provide support when removing an internal chimney breast. Painted - Red or Grey Primer. Supplied in pairs. SpecificationHorizontal and vertical angle 50 x 50 x 5mm.45 degree angle 25 x 25 x 3mm.Holed for M12. Finished in red Oxide Primer.InstallationThe chimney breast..
£55.76
£66.91 inc VAT
Brand: TECO
Model: ARRM
Delivery Time: In stock, 1-2 days
1m x 50m Alkaline Resistant Render Mesh reinforcing mesh which is made from woven fibre-glass yarns and coated with an alkaline resistant latex. This coating prevents the alkaline present in cements from degrading the glass fibre, resulting in reduced strength. The mesh is ideal for use in cons..
£56.14
£67.37 inc VAT
Brand: TECO
Model: FB50
Delivery Time: In stock, 1-2 days
50x50mm Galvanised steel, powder coated Bolt Down Shoe. A fence post supports in both standard and heavy duty. Hole size M10. Installation To bolt down onto existing concrete. Suggested fixing 10 x 80mm sleeve anchor...
£10.59
£12.71 inc VAT
Brand: TECO
Model: LL - 100x450
Delivery Time: In stock, 1-2 days
100x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support...
£4.83
£5.80 inc VAT
Brand: TECO
Model: LD200B50
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 200mm Bent 50mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centre..
£0.55
£0.66 inc VAT
Brand: TECO
Model: FHMR140
Delivery Time: 2 - 4 days
Single Piece Masonry Hanger Lock Plate is an additional element to use with the FHM Single Piece Joist Hanger and the WM Welded Masonry Joist Hanger. This plate is easily be transformed into a hook over joist hanger. No special tools or rivets are required. Just insert Lock ..
£1.34
£1.61 inc VAT