8mm Standard Plastic Plug
8mm Standard Plastic Plug
Length: 40mm
Width: 8mm
8mm Standard Plug is a standard plastic plug for 8mm hole diameter and 40mm in length. Suitable for solid base materials.
Features
- Anchor hole size - 8mm
- Plug length - 40mm
- Min. anchor hole length - 45mm
- Wood screw size - 5mm to 6mm
Brand: TECO
Model: FRS75
Delivery Time: In stock, 1-2 days
75x75mm Repair Spike is used to repair a damaged or rotten post set into existing concrete. Galvanised steel, powder coated. Ideal for replacing broken posts set in concrete. Shoe height: 150mm, Support height: 300mm..
£11.05
£13.26 inc VAT
Brand: TECO
Model: EMLG63
Delivery Time: In stock, 1-2 days
63mm Galvanised Coiled Mesh Lath is produced for brick and block work reinforcement. Primarily usage is to prevent cracking. Specification Galvanised steel EN 10346 DX51D Z275, Available in 20 metre coilsInstallation Overlap by a minimum of 75mm when joining two lengths together...
£7.32
£8.78 inc VAT
Brand: TECO
Model: GBCLIP150/50
Delivery Time: In stock, 1-2 days
150mm Galvanised Gravel Board Clips for fitting gravel boards securely to timber fence posts. Width 55mm. Made from Galvanised Steel EN 10346 DX51D Z275. ..
£1.48
£1.78 inc VAT
Brand: TECO
Model: LD1200T100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 1200mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm off..
£2.20
£2.64 inc VAT
Brand: TECO
Model: CSHBZPM6x75
Delivery Time: In stock, 1-2 days
6mm - 75mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied compl..
£20.04
£24.05 inc VAT
Brand: TECO
Model: LL - 125x450
Delivery Time: In stock, 1-2 days
125x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support...
£5.16
£6.19 inc VAT