45x240mm Top Fix I-Joist Hanger
45x240mm Top Fix I-Joist Hanger
Price: £1.69 (£2.03 inc VAT)
- Product Code: A1-5458
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: TIJ-TI - 45x240mm
- Weight: 259.00g
45x240mm Top Fix I-Joist Hanger
Width: 45mm
Height: 240mm
Thickness: 0.7mm
Weight: 259g
45x240mm Top Fix I-Joist Hanger is an innovative new backer free Joist Hanger to suit solid engineered wood products as well as I-Joists. It is engineered to combine maximum load carrying capacity with easy hands-free site installation, at minimum cost. Long term safe working load = 4.3 kN. Long term safe working load with enhanced nailing = 8.6 kN.
CHARACTERISTICS
- Unique hands free installation,
- Qualified for use with various nail types,
- Requires less nails,
- Face fix or top fix design,
- Enhanced load carrying option,
- Can be used on solid EWP or I-Joists.
FIXING INSTRUCTIONS for 45x240mm Top Fix I-Joist Hanger
- All standard round holes should be filled with either 2.65 x 40mm or 2.8 x 40mm or 3.4 x 35mm ring-shank nails or 3.75 x 30mm square twist nails.
- Fill diamond shaped holes for enhanced installation to I-Joist with backer blocks or solid LVL or Glulam headers.
- The TIJs unique hands free design locates the hanger on I-Joist headers leaving the installer with both hands free for easier installation.
SPECIFICATION
- 0.7mm pre galvanised mild steel EN 10346 DX51D Z275.
I-Joist-Hangers_data_sheet.pdf
Brand: TECO
Model: FHMR47X100R150
Delivery Time: In stock, 1-2 days
The Masonry Return Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The return adds additional lateral support by wrapping around the back of the masonry or timber. They have a 25mm drop on the return flange as standard but many special..
£3.56
£4.27 inc VAT
Brand: TECO
Model: HG3
Delivery Time: In stock, 1-2 days
Helical Bar Grout is a high performance, non-shrink, non-gassing, thixotropic, cement based grout, suitable for injection with a hand or power applicator. It has a low liquid to powder ratio, which gives the thixotropic ability - the grout would flow sufficiently to form a uniform layer, then to res..
£64.34
£77.21 inc VAT
Brand: TECO
Model: LD200B50
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 200mm Bent 50mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centre..
£0.53
£0.64 inc VAT
Brand: TECO
Model: WB30x5
Delivery Time: In stock, 1-2 days
30x5 galvanised steel water bar for fitting into door sills for weather protection. Edge coated galvanised steel EN 10346 DX51D Z600. Traditionally used with wooden doors, the water bar is fitted into the threshold so that the front door closes against it, sealing any gaps and preventing wind a..
£6.25
£7.50 inc VAT
Brand: TECO
Model: WM50x250
Delivery Time: 3 - 5 days
50mm x 250mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£4.26
£5.11 inc VAT
Brand: TECO
Model: ARM
Delivery Time: In stock, 1-2 days
200mm Mortice Arris Rail Bracket is used for attaching a standard arris rail to a concrete post. Made from galvanised steel EN 10346 DX51D Z275. The Arris rail bracket is hammered into the mortise hole on a concrete post to allow a new triangular Arris rail to be installed. This is the per..
£3.74
£4.49 inc VAT