Menu
Menu
Your Cart
Joist Hangers
Joist Hangers
stainless steel and galvanised metal lath sheets
restraint straps and bands

Heavy Duty Restraint Strap 1200mm Flat

Heavy Duty Restraint Strap 1200mm Flat
Price: £3.58 (£4.30 inc VAT)
  • Product Code: A1-5401
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model: HD1200F
  • Weight: 1,116.00g
Show other lengths

Need custom bends or twists?

Fill below and send for a quote.

Strap #1

/
Total length of the strap
mm
Length to
/
mm
angle
degrees
Quantity

Galvanised Heavy Duty Restraint Strap 1200mm Flat

Length: 1200mm
Width: 28mm
Thickness: 4mm
Weight: 1116g

Galvanised Heavy Duty Restraint Strap 1200mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.

INSTALLATION

For galvanised straps use min 7 no. 3.75 x 30 square twist nails or equivalent fixed to timber joists / rafters.

SPECIFICATION

The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.

Please note: 1-3 metre lengths come from a coil rather than a solid rigid bar. The physical characteristics of the metal mean that after a certain length they can bend rather than being flat rigid. It is not a question of any fault but rather the ‘nature of the beast’. The phrase: “straps are flat” is not misleading! It means they are not bent or twisted; at no point is there any claim that they are straight and true. Strap material is edge-coat galvanised which is required by the standard. This process, and the fact that the material is a coil does cause deflection, and the longer the length the more it is apparent.

Brand: TECO Model: TRS600B100
Delivery Time: In stock, 1-2 days
600mm bent 100mm Ron Sammons strap is a lightweight restraint strap that can be used instead of a traditional Heavy Duty Strap to provide lateral restraint of roof trusses, rafters and joists tied to masonry and for vertical applications such as holding down the wall plate. Designed to The Building ..
£1.15
£1.38 inc VAT
Brand: TECO Model: HWTNT275
Delivery Time: In stock, 1-2 days
275mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings.  The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONA..
£15.60
£18.72 inc VAT
Brand: TECO Model: FHMR47X225R100
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£4.43
£5.32 inc VAT
Brand: TECO Model: FHMR115
Delivery Time: 2 - 4 days
Single Piece Masonry Hanger Lock Plate is an additional element to use with the FHM Single Piece Joist Hanger and the WM Welded Masonry Joist Hanger. This plate is easily be transformed into a hook over joist hanger. No special tools or rivets are required. Just insert Lock ..
£1.06
£1.27 inc VAT
Brand: TECO Model: FRS75
Delivery Time: In stock, 1-2 days
75x75mm Repair Spike is used to repair a damaged or rotten post set into existing concrete. Galvanised steel, powder coated. Ideal for replacing broken posts set in concrete.  Shoe height: 150mm, Support height: 300mm..
£11.05
£13.26 inc VAT
Brand: TECO Model: ST150
Delivery Time: In stock, 1-2 days
Mild Steel Screw Ties are used to tie timber door and window frames to adjacent brickwork. Zinc and yellow passivated mild steel. Threaded one end. Screw directly into timber using a small pilot hole if required.  - 5mm..
£35.00
£42.00 inc VAT

Rate this product

Please login or register to review