150x300mm Woody Standard Joist Hanger
150x300mm Woody Standard Joist Hanger
Price: £3.35 (£4.02 inc VAT)
- Product Code: A1-5168
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: STD - 150x300
- Weight: 252.00g
150x300mm Woody Standard Joist Hanger
Width: 150mm
Height: 300mm
Thickness: 0.8mm
Weight: 252g
150x300mm Woody Standard Joist Hanger is a timber to timber joist hanger produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is also available in stainless steel. The hanger includes a base tag, which can significantly contribute to faster and more accurate installation and to avoid unnecessary rotation. This tag can easily be bent if it is not necessary.
Long term safe working load = 6 kN. The hangers have been accordingly tested by Ceram Research. The test results are available upon request.
.png)
FIXING INSTRUCTIONS for 150x300mm Woody Standard Joist Hanger
- 30mm x 3.75mm Square Twisted nails should be used for nailing the holes during installation.
- For stainless steel products use 30mm x 3.75mm stainless steel annular ring shank nails.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- The tag can be bent if not required.
SPECIFICATION
- Joist bearing 50mm.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Timber-to-Timber-Joist-Hangers_data_sheet.pdf
Brand: TECO
Model: TDS150/25
Delivery Time: In stock, 1-2 days
150mm Timber Drive Screw is a heavy duty fixing that requires no pre-drilling. Suitable for many timber to timber applications. FeaturesHeat treated shank for extra strength.Green organic coating.Each pack comes complete with driver.InstallationScrew directly into timber, no pre dril..
£17.56
£21.07 inc VAT
Brand: TECO
Model: NUTFBZPM6
Delivery Time: In stock, 1-2 days
M6 Zinc Plated Hex Full Nuts for use with bolts and studding. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa...
£3.25
£3.90 inc VAT
Brand: TECO
Model: HD1200T150
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1200mm Twisted 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres h..
£3.58
£4.30 inc VAT
Brand: TECO
Model: LD200F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 200mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres hol..
£0.55
£0.66 inc VAT
Brand: TECO
Model: WM132x225
Delivery Time: 2 - 4 days
132mm x 225mm Welded Masonry Joist Hanger is designed to support 225mm high timber joist. The joist hanger's actual height is 215mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£9.73
£11.68 inc VAT
Brand: TECO
Model: CSHBZPM6x65
Delivery Time: In stock, 1-2 days
6mm - 65mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied compl..
£19.91
£23.89 inc VAT