100mm Timber Frame Tie
100mm Timber Frame Tie
Price: £0.43 (£0.52 inc VAT)
- Product Code: A1-5523
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: TFT100
- Weight: 13.00g
100mm Timber Frame Tie
Length: 100mm
Weight: 13g
100mm Timber Frame Ties are suitable for tying masonry outer cladding to softwood structural framework of domestic dwellings and industrial/commercial buildings up to 4 storeys and not greater than 15m in height. Suitable at a density of 4.4 ties per square meter for buildings anywhere in the South East of England where basic wind speed does not exceed 44 m/s and for buildings on town and city sites in areas where the basic wind speed does not exceed 52 m/s. In more severe situations the tie density should be increased to 7 ties per square meter.
Features
- Complies with a DD140 Type 6 tie.
- Meets with the appropriate parts of NHBC standards.
- Supplied with annular ring shank nails included.
Specification
- Grade 1.4301 austenitic stainless steel to EN 10088-2.
- Tested by CERAM Research Ltd.
Installation
- Suitable at a density of 4.4 ties per square metre for buildings anywhere in the South East of England where the basic wind speed does not exceed 44 m/s and for buildings on town and city sites in areas where the basic wind speed does not exceed 52 m/s. In more severe situations the tie density should be increased to 7 ties per square metre
Brand: TECO
Model: STD - 38x285
Delivery Time: In stock, 1-2 days
38x285mm Woody Standard Joist Hanger is a timber to timber joist hanger produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is also available in stainless steel. The hanger includes a base tag, which can significant..
£0.95
£1.14 inc VAT
Brand: TECO
Model: US4x20
Delivery Time: In stock, 1-2 days
4x20mm Ultimate Wood Screws - tempered and waxed high quality zinc plated steel, self-centering, self-countersinking, stick fit wood screws with slotted shank for reduced wood splitting and a sharp point for rapid starting with minimum force.CharacteristicsTempered and waxed high quality zinc p..
£4.65
£5.58 inc VAT
Brand: TECO
Model: AB150/90
Delivery Time: In stock, 1-2 days
150x90mm Heavy duty angle bracket is a versatile, general purpose 90-degree bracket used to strengthen timer joists, roof trusses etc. SpecificationPre Galvanised Mild Steel SD280GD+Z275Fixing InstructionsThe TECO Angle Bracket is the ultimate angle cleat using either Bolts, C..
£1.40
£1.68 inc VAT
Brand: TECO
Model: ABLD
Delivery Time: In stock, 1-2 days
50x50mm Heavy duty angle bracket is a versatile, general purpose 90-degree bracket used to strengthen timer joists, roof trusses etc. SpecificationPre Galvanised Mild Steel SD280GD+Z275Fixing InstructionsThe TECO Angle Bracket is the ultimate angle cleat using either Bolts, Co..
£0.55
£0.66 inc VAT
Brand: TECO
Model: NUTFBZPM6
Delivery Time: In stock, 1-2 days
M6 Zinc Plated Hex Full Nuts for use with bolts and studding. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa...
£3.25
£3.90 inc VAT
Brand: TECO
Model: WSS4x20
Delivery Time: In stock, 1-2 days
4x20mm Stainless Steel Wood screws - ideal for fixing stainless steel brackets and stainless steel mesh products when used with a stainless steel 18mm diameter washer. Grade 1.4301 austenitic stainless steel to EN 10088-2. Screw directly into timber using a small pilot hole if required...
£44.38
£53.26 inc VAT